Flowtech Measuring Instruments Private Limited

Application Media	Any Liquid
Material	Stainless Steel
Model Name/Number	FMIPL-HTFS-025 TO 150
Application	Industrial
Brand	Flowtech
Line Size	1/2" to 6 Inch
Model	FMIPL-HTFS-108
Accuracy	1 %
Flow range	100 - 3000000 LPH
Operating Pressure	60 Bar
Operating Temperature	60 Deg C

Minimum order quantity: 01 Piece

FLOWTECH developed and produced helical rotor Positive displacement flow sensor specially for replace oval gear flow sensor at some application where liquid is not pure and require easy and low weight flow meter ,Helical flow meters are positive displacement meters with a very favorable low pressure drop behavior. therefore perfectly suited for the flow measurement of very high viscosity fluids. Due to wide measuring ranges, high accuracy and resolution helical flow meters are an excellent choice for laminating systems, painting systems, adhesive dispense systems, as well as batching systems for various fluids.

Features :

: High accuracy

: Pressure: up to 60 bar , special range up to 200 bar

: Independent of viscosity, perfect for 1 to 106 mm²/s

: Low pressure drop compared with other positive displacement meters

: High resolution

: Pulsation-free measurement, non-sensitive to pulsating flows

: Resistant to corrosion by advanced materials and bearings.

 

Applications :

: Polyurethane and polymer

: Light and heavy fuel oil

: Petrochemical products

: Thixotropical fluids

: Fat and oils with varying viscosities

: Hydraulics Test rigs with varying viscosities and fluids

: Water / glycol mixtures

: Crude oil, furnace oil, and all viscous liquid even viscosity change with Temperature

: Very good for WATER atm, water dispensing, tea/coffee/wine/juce and other food liquid measurement and dispensing.

Technical Data Sheet

Material of construction:

Enclosure : S.S.-316/S.S-304/customer require

Rotor : stainless steel/ tantlum

Shaft : Hard Stainless Steel-316 / carbide

bearing : carbide with hard S.S. BALL

Accuracy (standard installation position) : +/- 0.25 /1% FSD Repeatability : 0.02%

Maximum working pressure : 100/400/1000 bar

Fluid &Ambient temperature: -40 to 120/150 Deg.

C Connection: Thread (M) / Flange

Brand	Flowtech
Operating Temperature	60 Deg C
Automation Grade	Manual
Operating Pressure	3.4 mpa
Line Size	1 Inch
Flow Range	12 - 120 LPM

Minimum order quantity: 1 Piece

Application:

• Digital Diesel Flow Meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. lt is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

Working Principle:

• The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotating

Pressure: 

• ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid pressu/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gear pushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of "measurement room". So, as long as the rotation of gears, the liquid volume can be counted.

 

Technical Data

 

Accuracy	1 %
Line Size	1 to 3 Inch
Brand	Flowtech
Operating Temperature (Celsius)	60 Deg C
Automation Grade	Manual
Weight	1.2 kg

Minimum order quantity: 1 Piece

The low pressure drop through the Fuel Flow Meter Instrument makes the meter ideally suited for use in gravity applications or with the Macnaught range of electric fuel pumps.Macnaught manufacture a full range of pumps and accessories to suit most of you fluid transfer needs oil, please consult your local Macnaught reseller for more information.

• Oval gear design with reset facility
• Flow range between 3-80 liter per minute
• Available in BSP (F)/1 NPT Suitable for fitting into tanks or process vessels for controlling liquid levels for preventing any kind of overflow
• Used to control dry pump running/solenoid valve
• Minimum 50 NB flanged to any size.
• Weather Proof (IP-65)or Flame Proof to IIA, IIB as per CMRS, Dhanbad approved
• External cage also available on customer request.

Brand	Flowtech
Application Media	Diesel , Kerosin , Oil, Any Liquid
Display	Local
Model	FFM-099
Operating Temperature (Celsius)	60 Deg C
Flow range(Min-Max)	20 - 300 LPM
Operating Pressure	1.8 mpa
Line Size	1
Accuracy (%)	0.5%
Automation Grade	Manual
Condition	New

Minimum order quantity: 1 Piece

The low pressure drop through the Automatic Fuel Flow Meter makes the meter ideally suited for use in gravity applications or with the Macnaught range of electric fuel pumps.Macnaught manufacture a full range of pumps and accessories to suit most of you fluid transfer needs oil, please consult your local Macnaught reseller for more information.

• Oval gear design with reset facility
• Simple to use with lightweight 1.2 Kg
• Flow range between 3-80 liter per minute
• High accuracy of 1% for reading
• Available in BSP (F)/1 NPT Suitable for fitting into tanks or process vessels for controlling liquid levels for preventing any kind of overflow
• Used to control dry pump running/solenoid valve
• Minimum 50 NB flanged to any size.
• Weather Proof (IP-65)or Flame Proof to IIA, IIB as per CMRS, Dhanbad approved
• External cage also available on customer request.

Macnaught recommends, that as added protection for your equipment you install a Macnaught fuel filter assembly in line before the inlet of your DM Fuel Meter. Contact your local Macnaught distributor for further details.

Accuracy	1%
Brand	Flowtech
Application	Industrial
Weight	1.2 Kg
Packaging type	Box

Minimum order quantity: 1 Piece

The low pressure drop through the Petrol and MTO Fuel Meter makes the meter ideally suited for use in gravity applications or with the Macnaught range of electric fuel pumps.Macnaught manufacture a full range of pumps and accessories to suit most of you fluid transfer needs oil, please consult your local Macnaught reseller for more information.

Other detail:

• Oval gear design with reset facility
• Flow range between 20 - 120 liter per minute
• Available in BSP (F)/1 NPT Suitable for fitting into tanks or process vessels for controlling liquid levels for preventing any kind of overflow
• Used to control dry pump running/solenoid valve
• Minimum 50 NB flanged to any size.
• Weather Proof (IP-65)or Flame Proof to IIA,IIB as per CMRS, Dhanbad approved
• External cage also available on customer request.

Brand	Flowtech
Flow range(Min-Max)	12 - 300 LPM
Automation Grade	Manual
Operating Pressure	1.8 mpa
Line Size	1 to 2 inch

Minimum order quantity: 1 Piece

Application:

• Diesel Flow meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. lt is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

Working Principle:

• The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotatingPressure .ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid pressu/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gearpushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of "measurement room". So, as long as the rotation of gears, the liquid volume can be counted.

Technical Data

Accuracy	1 %
Line Size	25 NB to 100 NB
Brand	Flowtech
Operating Temperature (Celsius)	70 Deg C
Flow range(Min-Max)	20 - 120 LPM
Operating Pressure	1.8 mpa
weight	1.2 Kg

Minimum order quantity: 1 Piece

FEATURES: Working principle: Oval gear positive displacement Mechanical Flow Meter Available and Reset type Leak proof & Dry totalised Maximum working pressure: 2 MPa = 20 bar Fluid &Ambient temperature: -40 to 80°C Accuracy (standard installation position) : 0.5% FSD Repeatability: 0.03% Use in Fuel, kerosene, Gasoline, diesel, light oil, heavy oil, petrol ,LDO, HDO, wine, bear alcohol, milk, juice, coffee all chemical and pharmaceutical drug. Always put a suitable strainer before the fuel flow meter.
DESCRIPTION:“FLOWTECH” Make Fuel Flow Meter FMIPL-OFMM-025 TO 50 Positive Displacement Fuel Meter. The Diesel Flow Meter FMIPL-OFMM-025 TO 50 has incorporated the oval rotor principal into its design. This has proven to be a highly reliable and highly accurate method of measuring flow, providing exceptional repeatability and high accuracy. The low pressure drop through the meter makes the meter ideally suited for use in gravity applications or with the Diesel Flow Meter & Digital Diesel Flow Meter range of electric fuel pumps.
WORKING PRINCIPLE:The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotating pressure .ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid press u/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gear pushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of "measurement room". So, as long as the rotation of gears, the liquid volume can be counted.
MATERIAL OF CONSTRUCTION:Body : Aluminium AnodiseRotor/Shaft : Aluminium AnodizeConnection : Thread (F).

Model Number/Name	110
Brand	Flowtech
Line Size	25NB to 250NB
Size	1-2 Inch
Max Pressure	3.4 MPA
Max Viscosity	1000 CPS
Repeatability	0.03%

Minimum order quantity: 1 Piece

Application:

• Diesel Flow meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. lt is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

Working Principle:

• The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotatingPressure .ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid pressu/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gearpushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of "measurement room". So, as long as the rotation of gears, the liquid volume can be counted.

 

Application Media	Water
Model	FMIPL-FFM-090
Brand	Flowtech
Line Size	25 NH TO 150 NB
Display	Local
Operating Temperature (Celsius)	90 Deg C
Flow range(Min-Max)	20 - 300 LPM
Operating Pressure	1.8 mpa
Condition	New

Minimum order quantity: 01 Piece

Application :

Diesel Flow meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. lt is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

Working Principle:

 

The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotating.

Features:

• Based on oval rotor principal
• Reliable performance
• Measures flow

Applications:

• Scientific laboratory
• Research centres
• Chemical industries.

Specifications:

• Oval gear design with reset facility
• Simple to use with light weight 1.2 Kg
• Flow range between 3-80 liter per minute
• High accuracy of 1% for reading
• Available in BSP (F)/1 NPT Suitable for fitting into tanks or process vessels for controlling liquid levels for preventing any kind of overflow
• Used to control dry pump running/solenoid valveMinimum 25 NB flanged to any size.
• Weather Proof (IP-65)or Flame Proof to IIA,IIB as per CMRS, Dhanbad approvedExternal cage also available on customer request

Technical Data