Flowtech Measuring Instruments Private Limited
ISO 9001:2008 Certified
Vadodara, Gujarat
Home»Our Products»

Electromagnetic Flow Meters

DESCRIPTION

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

WORKING PRINCIPLE

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

TECHNICAL DETAIL

Nominal Dia (mm) : 15 to 400

Material of Construction : MS, SS 304, SS 316 & SS 316L

Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

Process Pressure : Max. 25 kg/cm2

Process Temperature : Max. 150C

Flow Tube Material : SS 316

End Connection : Flange/Wafer

Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

Accuracy : ± 1% FSD Optional: ±0.5% FSD.

Repeatability : 0.3%

Display : 2 Line Alfa Numeric LCD

Display Version : Integral /Remote

Display Unit : Standard Unit in M3, Litre

Power Supply : 230 VAC, 110 VAC & 24 VDC

Output : Std. 4 – 20 mA

Protection Class for Sensor : IP 65

Protection Class for Transmitter : IP 65

Cable Length for Remote : 10 meters.

Installation : Inline Flange Type



Approx. Rs 21,600 / Piece

Item Code: EMFM-0552

DESCRIPTION

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

WORKING PRINCIPLE

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

TECHNICAL DETAIL

Nominal Dia (mm) : 15 to 400

Material of Construction : MS, SS 304, SS 316 & SS 316L

Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

Process Pressure : Max. 25 kg/cm2

Process Temperature : Max. 150C

Flow Tube Material : SS 316

End Connection : Flange/Wafer

Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

Accuracy : ± 1% FSD Optional: ±0.5% FSD.

Repeatability : 0.3%

Display : 2 Line Alfa Numeric LCD

Display Version : Integral /Remote

Display Unit : Standard Unit in M3, Litre

Power Supply : 230 VAC, 110 VAC & 24 VDC

Output : Std. 4 – 20 mA

Protection Class for Sensor : IP 65

Protection Class for Transmitter : IP 65

Cable Length for Remote : 10 meters.

Installation : Inline Flange Type




Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage

Approx. Rs 21,600 / Piece

Item Code: EMF-01

FLOWTECH Make Digital Water Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

  • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:

  • Material of Construction: MS, SS 304, SS 316 & SS 316L
  • Process Pressure: Max. 25 kg/cm2
  • Process Temperature: Max. 150C
  • Nominal Dia (mm) : 15 to 400
  • Material of Construction : MS, SS 304, SS 316 & SS 316L
  • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
  • Process Pressure : Max. 25 kg/cm2
  • Process Temperature : Max. 150C
  • Flow Tube Material : SS 316
  • End Connection : Flange/Wafer
  • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
  • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
  • Accuracy : ± 1% FSD Optional: ±0.5% FSD
  • Repeatability : 0.3%
  • Display : 2 Line Alfa Numeric LCD
  • Display Version : Integral /Remote
  • Display Unit : Standard Unit in M3, Litre
  • Power Supply : 230 VAC, 110 VAC & 24 VDC
  • Output : Std. 4 – 20 mA
  • Protection Class for Sensor : IP 65
  • Protection Class for Transmitter : IP 65
  • Cable Length for Remote : 10 meters
  • Installation : Inline Flange Type


Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden cages

Approx. Rs 21,600 / Piece

Item Code: EMFM-02

Magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids.

Features:

  • Measure flow correctly
  • Computes flow rate
  • Determines liquid velocity

Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries


  • Specifications:

  • Nominal Dia (mm): 15 to 400
  • Material of Construction: MS, SS 304, SS 316 & SS 316L
  • Process Pressure: Max. 25 kg/cm2
  • Process Temperature: Max. 150C
  • Nominal Dia (mm) : 15 to 400
  • Material of Construction : MS, SS 304, SS 316 & SS 316L
  • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
  • Process Pressure : Max. 25 kg/cm2
  • Process Temperature : Max. 150C
  • Flow Tube Material : SS 316
  • End Connection : Flange/Wafer
  • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
  • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
  • Accuracy : ± 1% FSD Optional: ±0.5% FSD
  • Repeatability : 0.3%
  • Display : 2 Line Alfa Numeric LCD
  • Display Version : Integral /Remote
  • Display Unit : Standard Unit in M3, Litre
  • Power Supply : 230 VAC, 110 VAC & 24 VDC
  • Output : Std. 4 – 20 mA
  • Protection Class for Sensor : IP 65
  • Protection Class for Transmitter : IP 65
  • Cable Length for Remote : 10 meters
  • Installation : Inline Flange Type


Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 week
  • Packaging Details: Wooden Cages

Approx. Rs 21,600 / Piece

Item Code: EMFM-0608

Electromagnetic Flow Meter from our side are a known name in the market. A magnetic field is generated and channelled into the liquid flowing through the pipe. Following Faraday’s Law, flow of a conductive liquid through the magnetic field will cause a voltage signal to be sensed by electrodes located on the flow tube walls. When the fluid moves faster, more voltage is generated.

Features:


  • Correct movement of fluid
  • Easy to maintain
  • Low in terms of maintenance

Applications:


  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Nominal Dia (mm): 15 to 400
  • Material of Construction: MS, SS 304, SS 316 & SS 316L
  • Process Pressure: Max. 25 kg/cm2
  • Process Temperature: Max. 150C
  • Nominal Dia (mm) : 15 to 400
  • Material of Construction : MS, SS 304, SS 316 & SS 316L
  • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
  • Process Pressure : Max. 25 kg/cm2
  • Process Temperature : Max. 150C
  • Flow Tube Material : SS 316
  • End Connection : Flange/Wafer
  • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
  • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
  • Accuracy : ± 1% FSD Optional: ±0.5% FSD
  • Repeatability : 0.3%
  • Display : 2 Line Alfa Numeric LCD
  • Display Version : Integral /Remote
  • Display Unit : Standard Unit in M3, Litre
  • Power Supply : 230 VAC, 110 VAC & 24 VDC
  • Output : Std. 4 – 20 mA
  • Protection Class for Sensor : IP 65
  • Protection Class for Transmitter : IP 65
  • Cable Length for Remote : 10 meters
  • Installation : Inline Flange Type




Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Box & Box

Approx. Rs 21,600 / Piece

Item Code: EMFM-0616

We are a renowned and widely appreciated organization engaged in offering a comprehensive range of Water Flow Meter Types made from the top quality raw materials supplied by the best vendors in the business. These meters are highly demanded by the clients owing to their accuracy, high speed conduction and long lasting capabilities. Keeping in mind various requirements of the clients, we offer them in various designs, shapes and sizes as per the client's demand.

Features:

  • Correct measurement
  • Negligible maintenance
  • Measures the flow rate

Applications:


  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Nominal Dia (mm): 15 to 400
  • Material of Construction: MS, SS 304, SS 316 & SS 316L
  • Process Pressure: Max. 25 kg/cm2
  • Process Temperature: Max. 150C
  • Nominal Dia (mm) : 15 to 400
  • Material of Construction : MS, SS 304, SS 316 & SS 316L
  • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
  • Process Pressure : Max. 25 kg/cm2
  • Process Temperature : Max. 150C
  • Flow Tube Material : SS 316
  • End Connection : Flange/Wafer
  • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
  • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
  • Accuracy : ± 1% FSD Optional: ±0.5% FSD.
  • Repeatability : 0.3%
  • Display : 2 Line Alfa Numeric LCD
  • Display Version : Integral /Remote
  • Display Unit : Standard Unit in M3, Litre
  • Power Supply : 230 VAC, 110 VAC & 24 VDC
  • Output : Std. 4 – 20 mA
  • Protection Class for Sensor : IP 65
  • Protection Class for Transmitter : IP 65
  • Cable Length for Remote : 10 meters
  • Installation : Inline Flange Type


Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 piece per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage

Approx. Rs 21,600 / Piece

Item Code: SEMFM-0022

Our company is a renowned name in the area of Sanitary Electromagnetic Flow Meter. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. This one from our side requires a conducting fluid, for example, water that contains ions, and an electrical insulating pipe surface, for example, a rubber-lined steel tube.

Features:

  • Accurate electromagnetic induction
  • Perfect magnetic field is applied
  • Correct measurement

Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Nominal Dia (mm): 15 to 400
  • Material of Construction: MS, SS 304, SS 316 & SS 316L
  • Process Pressure: Max. 25 kg/cm2
  • Process Temperature: Max. 150C
  • Meter Size : 1” to 4”
  • Pressure : 40 Bar max
  • Media Temperature : 150C max
  • Ambient Temperature: 4 to 50C
  • Material : Pipe : SS304
  • Liner: PTFE Food Grade
  • Electrodes :SS316L
  • Coil Housing : SS304/SS316
  • End Connections: SS304/SS316
  • Min.Media conductivity: 5 micro-siemens per cm
  • Output : 1) 4 to 20 mA proportional to flow Rate, isolated from input,body and power supply (Standard). 2) Pulse Output, open collector type, proportional to totalizing rate (Optional)
  • Local Display (Optional) : a) Flow Rate, 3½ digit LCD/LED. b) Total Quantity, 8 Digit LCD/LED
  • Accuracy : 0.5% of reading from 100% to 10% flow rate
  • Flow Velocity Range : 0.5 m/s to 5 m/s. (Higher velocities can be catered on request)
  • Power Supply : 1) 110 Vac/230 Vac,50/60 Hz.(Standard) 2) 24 Vdc/12 Vdc. (Optional)
  • Power Rating : 10VA Max
  • Ingress Protection: IP68 for Primary Flow Sensor,IP65 for flow Transmitter

 


 



Other Information
  • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
  • Minimum Order Quantity: 1 Piece
  • Port of Dispatch: Mumbai
  • Production Capacity: 100 piece per Month
  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Box & Box

Approx. Rs 21,600 / Piece(s)

Item Code: EMFM-059

DESCRIPTION

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

WORKING PRINCIPLE

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

TECHNICAL DETAIL

Nominal Dia (mm) : 15 to 400

Material of Construction : MS, SS 304, SS 316 & SS 316L

Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

Process Pressure : Max. 25 kg/cm2

Process Temperature : Max. 150C

Flow Tube Material : SS 316

End Connection : Flange/Wafer

Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

Accuracy : ± 1% FSD Optional: ±0.5% FSD.

Repeatability : 0.3%

Display : 2 Line Alfa Numeric LCD

Display Version : Integral /Remote

Display Unit : Standard Unit in M3, Litre

Power Supply : 230 VAC, 110 VAC & 24 VDC

Output : Std. 4 – 20 mA

Protection Class for Sensor : IP 65

Protection Class for Transmitter : IP 65

Cable Length for Remote : 10 meters.

Installation : Inline Flange Type




    Other Information
    • Minimum Order Quantity: 1 Piece(s)
    • Port of Dispatch: Mumbai
    • Production Capacity: 500 Pieces Per Month
    • Delivery Time: 2 Week
    • Packaging Details: Wooden Cages

    Approx. Rs 21,600 / Piece

    Item Code: EMFM-089

    DESCRIPTION

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

    WORKING PRINCIPLE

    This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

    TECHNICAL DETAIL

    Nominal Dia (mm) : 15 to 400

    Material of Construction : MS, SS 304, SS 316 & SS 316L

    Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

    Process Pressure : Max. 25 kg/cm2

    Process Temperature : Max. 150C

    Flow Tube Material : SS 316

    End Connection : Flange/Wafer

    Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

    Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

    Accuracy : ± 1% FSD Optional: ±0.5% FSD.

    Repeatability : 0.3%

    Display : 2 Line Alfa Numeric LCD

    Display Version : Integral /Remote

    Display Unit : Standard Unit in M3, Litre

    Power Supply : 230 VAC, 110 VAC & 24 VDC

    Output : Std. 4 – 20 mA

    Protection Class for Sensor : IP 65

    Protection Class for Transmitter : IP 65

    Cable Length for Remote : 10 meters.

    Installation : Inline Flange Type




    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Port of Dispatch: Mumbai
    • Production Capacity: 500 Pieces per Month
    • Delivery Time: 2 weeks
    • Packaging Details: wooden cages

    Approx. Rs 21,600 / Piece

    Item Code: EMFM-0154

    DESCRIPTION

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

    WORKING PRINCIPLE

    This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

    TECHNICAL DETAIL

    Nominal Dia (mm) : 15 to 400

    Material of Construction : MS, SS 304, SS 316 & SS 316L

    Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

    Process Pressure : Max. 25 kg/cm2

    Process Temperature : Max. 150C

    Flow Tube Material : SS 316

    End Connection : Flange/Wafer

    Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

    Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

    Accuracy : ± 1% FSD Optional: ±0.5% FSD.

    Repeatability : 0.3%

    Display : 2 Line Alfa Numeric LCD

    Display Version : Integral /Remote

    Display Unit : Standard Unit in M3, Litre

    Power Supply : 230 VAC, 110 VAC & 24 VDC

    Output : Std. 4 – 20 mA

    Protection Class for Sensor : IP 65

    Protection Class for Transmitter : IP 65

    Cable Length for Remote : 10 meters.

    Installation : Inline Flange Type




    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Port of Dispatch: Mumbai
    • Production Capacity: 500 Pieces per month
    • Delivery Time: 2 week
    • Packaging Details: wooden cages

    Approx. Rs 21,600 / Piece

    Item Code: EMFM-0944

    DESCRIPTION

    FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

    WORKING PRINCIPLE

    This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

    TECHNICAL DETAIL

    Nominal Dia (mm) : 15 to 400

    Material of Construction : MS, SS 304, SS 316 & SS 316L

    Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

    Process Pressure : Max. 25 kg/cm2

    Process Temperature : Max. 150C

    Flow Tube Material : SS 316

    End Connection : Flange/Wafer

    Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

    Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

    Accuracy : ± 1% FSD Optional: ±0.5% FSD.

    Repeatability : 0.3%

    Display : 2 Line Alfa Numeric LCD

    Display Version : Integral /Remote

    Display Unit : Standard Unit in M3, Litre

    Power Supply : 230 VAC, 110 VAC & 24 VDC

    Output : Std. 4 – 20 mA

    Protection Class for Sensor : IP 65

    Protection Class for Transmitter : IP 65

    Cable Length for Remote : 10 meters.

    Installation : Inline Flange Type




    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Port of Dispatch: Mumbai
    • Production Capacity: 500 Piece per month
    • Delivery Time: 2 week
    • Packaging Details: Wooden Cage

    Approx. Rs 21,600 / Piece

    Item Code: EMFM-153

    FLOWTECH Make Sanitary Magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.


    Working Principle:

    • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

    Applications:

    • Scientific laboratory
    • Research centres
    • Chemical industries

    Specifications:

    • Nominal Dia (mm): 15 to 400
    • Material of Construction: MS, SS 304, SS 316 & SS 316L
    • Process Pressure: Max. 25 kg/cm2
    • Process Temperature: Max. 150C
    • Nominal Dia (mm) : 15 to 400
    • Material of Construction : MS, SS 304, SS 316 & SS 316L
    • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
    • Process Pressure : Max. 25 kg/cm2
    • Process Temperature : Max. 150C
    • Flow Tube Material : SS 316
    • End Connection : Flange/Wafer
    • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
    • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
    • Accuracy : ± 1% FSD Optional: ±0.5% FSD
    • Repeatability : 0.3%
    • Display : 2 Line Alfa Numeric LCD
    • Display Version : Integral /Remote
    • Display Unit : Standard Unit in M3, Litre
    • Power Supply : 230 VAC, 110 VAC & 24 VDC
    • Output : Std. 4 – 20 mA
    • Protection Class for Sensor : IP 65
    • Protection Class for Transmitter : IP 65
    • Cable Length for Remote : 10 meters
    • Installation : Inline Flange Type



    Other Information
    • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
    • Minimum Order Quantity: 1 Piece
    • Port of Dispatch: Mumbai
    • Production Capacity: 500 pieces per month
    • Delivery Time: 2 weeks
    • Packaging Details: Wooden Box

    Approx. Rs 21,600 / Piece

    Item Code: EMFM-0722

    FLOWTECH Make Magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

    Working Principle:

    • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

    Applications:

    • Scientific laboratory
    • Research centres
    • Chemical industries

    Specifications:

    • Nominal Dia (mm): 15 to 400
    • Material of Construction: MS, SS 304, SS 316 & SS 316L
    • Process Pressure: Max. 25 kg/cm2
    • Process Temperature: Max. 150C
    • Nominal Dia (mm) : 15 to 400
    • Material of Construction : MS, SS 304, SS 316 & SS 316L
    • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
    • Process Pressure : Max. 25 kg/cm2
    • Process Temperature : Max. 150C
    • Flow Tube Material : SS 316
    • End Connection : Flange/Wafer
    • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
    • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
    • Accuracy : ± 1% FSD Optional: ±0.5% FSD
    • Repeatability : 0.3%
    • Display : 2 Line Alfa Numeric LCD
    • Display Version : Integral /Remote
    • Display Unit : Standard Unit in M3, Litre
    • Power Supply : 230 VAC, 110 VAC & 24 VDC
    • Output : Std. 4 – 20 mA
    • Protection Class for Sensor : IP 65
    • Protection Class for Transmitter : IP 65
    • Cable Length for Remote : 10 meters
    • Installation : Inline Flange Type


      Other Information
      • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
      • Minimum Order Quantity: 1 Piece
      • Port of Dispatch: Mumbai
      • Production Capacity: 500 Pieces per month
      • Delivery Time: 2 weeks
      • Packaging Details: Wooden Cages

      Approx. Rs 21,600 / Piece(s)

      Item Code: EMFM-0121

      DESCRIPTION

      FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

      WORKING PRINCIPLE

      This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      TECHNICAL DETAIL

      Nominal Dia (mm) : 15 to 400

      Material of Construction : MS, SS 304, SS 316 & SS 316L

      Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

      Process Pressure : Max. 25 kg/cm2

      Process Temperature : Max. 150C

      Flow Tube Material : SS 316

      End Connection : Flange/Wafer

      Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

      Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

      Accuracy : ± 1% FSD Optional: ±0.5% FSD.

      Repeatability : 0.3%

      Display : 2 Line Alfa Numeric LCD

      Display Version : Integral /Remote

      Display Unit : Standard Unit in M3, Litre

      Power Supply : 230 VAC, 110 VAC & 24 VDC

      Output : Std. 4 – 20 mA

      Protection Class for Sensor : IP 65

      Protection Class for Transmitter : IP 65

      Cable Length for Remote : 10 meters.

      Installation : Inline Flange Type



      Other Information
      • Minimum Order Quantity: 1 Piece(s)
      • Port of Dispatch: Mumbai
      • Production Capacity: 500 Piece per month
      • Delivery Time: 1 weeks
      • Packaging Details: Wooden Cages

      Approx. Rs 21,600 / Piece

      Item Code: EMFM-024

      DESCRIPTION

      FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

      WORKING PRINCIPLE

      This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      TECHNICAL DETAIL

      Nominal Dia (mm) : 15 to 400

      Material of Construction : MS, SS 304, SS 316 & SS 316L

      Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

      Process Pressure : Max. 25 kg/cm2

      Process Temperature : Max. 150C

      Flow Tube Material : SS 316

      End Connection : Flange/Wafer

      Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

      Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

      Accuracy : ± 1% FSD Optional: ±0.5% FSD.

      Repeatability : 0.3%

      Display : 2 Line Alfa Numeric LCD

      Display Version : Integral /Remote

      Display Unit : Standard Unit in M3, Litre

      Power Supply : 230 VAC, 110 VAC & 24 VDC

      Output : Std. 4 – 20 mA

      Protection Class for Sensor : IP 65

      Protection Class for Transmitter : IP 65

      Cable Length for Remote : 10 meters.

      Installation : Inline Flange Type




      Other Information
      • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
      • Minimum Order Quantity: 1 Piece
      • Port of Dispatch: Mumbai
      • Production Capacity: 500 Pieces per month
      • Delivery Time: 1 week
      • Packaging Details: Wooden Cages

      Approx. Rs 21,600 / Piece

      Item Code: EMFM-09

      Working Principle:

      • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      Applications:

      • Scientific laboratory
      • Research centres
      • Chemical industries

      Specifications:

      • Nominal Dia (mm): 15 to 400
      • Material of Construction: MS, SS 304, SS 316 & SS 316L
      • Process Pressure: Max. 25 kg/cm2
      • Process Temperature: Max. 150C
      • Nominal Dia (mm) : 15 to 400
      • Material of Construction : MS, SS 304, SS 316 & SS 316L
      • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
      • Process Pressure : Max. 25 kg/cm2
      • Process Temperature : Max. 150C
      • Flow Tube Material : SS 316
      • End Connection : Flange/Wafer
      • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
      • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
      • Accuracy : ± 1% FSD Optional: ±0.5% FSD
      • Repeatability : 0.3%
      • Display : 2 Line Alfa Numeric LCD
      • Display Version : Integral /Remote
      • Display Unit : Standard Unit in M3, Litre
      • Power Supply : 230 VAC, 110 VAC & 24 VDC
      • Output : Std. 4 – 20 mA
      • Protection Class for Sensor : IP 65
      • Protection Class for Transmitter : IP 65
      • Cable Length for Remote : 10 meters
      • Installation : Inline Flange Type


      Other Information
      • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
      • Minimum Order Quantity: 1 Piece
      • Port of Dispatch: MUMBAI
      • Production Capacity: 500 PIECES PER MONTH
      • Delivery Time: 2 WEEKS
      • Packaging Details: WOODEN CAGES

      Approx. Rs 21,600 / Piece(s)

      Item Code: EMFM-0146

      DESCRIPTION

      FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

      WORKING PRINCIPLE

      This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      TECHNICAL DETAIL

      Nominal Dia (mm) : 15 to 400

      Material of Construction : MS, SS 304, SS 316 & SS 316L

      Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

      Process Pressure : Max. 25 kg/cm2

      Process Temperature : Max. 150C

      Flow Tube Material : SS 316

      End Connection : Flange/Wafer

      Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

      Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

      Accuracy : ± 1% FSD Optional: ±0.5% FSD.

      Repeatability : 0.3%

      Display : 2 Line Alfa Numeric LCD

      Display Version : Integral /Remote

      Display Unit : Standard Unit in M3, Litre

      Power Supply : 230 VAC, 110 VAC & 24 VDC

      Output : Std. 4 – 20 mA

      Protection Class for Sensor : IP 65

      Protection Class for Transmitter : IP 65

      Cable Length for Remote : 10 meters.

      Installation : Inline Flange Type




      Other Information
      • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
      • Minimum Order Quantity: 1 Piece(s)
      • Port of Dispatch: Mumbai
      • Production Capacity: 500 Pieces per month
      • Delivery Time: 2 weeks
      • Packaging Details: Wooden Cages

      Approx. Rs 21,600 / Piece

      Item Code: EMFM-0712

      Working Principle:

      • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      Applications:

      • Scientific laboratory
      • Research centres
      • Chemical industries

      Specifications:

      • Nominal Dia (mm): 15 to 400
      • Material of Construction: MS, SS 304, SS 316 & SS 316L
      • Process Pressure: Max. 25 kg/cm2
      • Process Temperature: Max. 150C
      • Nominal Dia (mm) : 15 to 400
      • Material of Construction : MS, SS 304, SS 316 & SS 316L
      • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
      • Process Pressure : Max. 25 kg/cm2
      • Process Temperature : Max. 150C
      • Flow Tube Material : SS 316
      • End Connection : Flange/Wafer
      • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
      • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
      • Accuracy : ± 1% FSD Optional: ±0.5% FSD
      • Repeatability : 0.3%
      • Display : 2 Line Alfa Numeric LCD
      • Display Version : Integral /Remote
      • Display Unit : Standard Unit in M3, Litre
      • Power Supply : 230 VAC, 110 VAC & 24 VDC
      • Output : Std. 4 – 20 mA
      • Protection Class for Sensor : IP 65
      • Protection Class for Transmitter : IP 65
      • Cable Length for Remote : 10 meters
      • Installation : Inline Flange Type


      Other Information
      • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
      • Minimum Order Quantity: 1 Piece
      • Port of Dispatch: Mumbai
      • Production Capacity: 500 Pieces per month
      • Delivery Time: 2 weeks
      • Packaging Details: Wooden Cages

      Approx. Rs 21,600 / Piece

      Item Code: EMFM-0203

      DESCRIPTION

      FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

      WORKING PRINCIPLE

      This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

      TECHNICAL DETAIL

      Nominal Dia (mm) : 15 to 400

      Material of Construction : MS, SS 304, SS 316 & SS 316L

      Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

      Process Pressure : Max. 25 kg/cm2

      Process Temperature : Max. 150C

      Flow Tube Material : SS 316

      End Connection : Flange/Wafer

      Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

      Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

      Accuracy : ± 1% FSD Optional: ±0.5% FSD.

      Repeatability : 0.3%

      Display : 2 Line Alfa Numeric LCD

      Display Version : Integral /Remote

      Display Unit : Standard Unit in M3, Litre

      Power Supply : 230 VAC, 110 VAC & 24 VDC

      Output : Std. 4 – 20 mA

      Protection Class for Sensor : IP 65

      Protection Class for Transmitter : IP 65

      Cable Length for Remote : 10 meters.

      Installation : Inline Flange Type




        Other Information
        • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
        • Minimum Order Quantity: 1 Piece
        • Port of Dispatch: Mumbai
        • Production Capacity: 500 per month
        • Delivery Time: 2 weeks
        • Packaging Details: Wooden Cages

        Approx. Rs 21,600 / Piece

        Item Code: EMFM-0042

        DESCRIPTION

        FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

        WORKING PRINCIPLE

        This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

        TECHNICAL DETAIL

        Nominal Dia (mm) : 15 to 400

        Material of Construction : MS, SS 304, SS 316 & SS 316L

        Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

        Process Pressure : Max. 25 kg/cm2

        Process Temperature : Max. 150C

        Flow Tube Material : SS 316

        End Connection : Flange/Wafer

        Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

        Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

        Accuracy : ± 1% FSD Optional: ±0.5% FSD.

        Repeatability : 0.3%

        Display : 2 Line Alfa Numeric LCD

        Display Version : Integral /Remote

        Display Unit : Standard Unit in M3, Litre

        Power Supply : 230 VAC, 110 VAC & 24 VDC

        Output : Std. 4 – 20 mA

        Protection Class for Sensor : IP 65

        Protection Class for Transmitter : IP 65

        Cable Length for Remote : 10 meters.

        Installation : Inline Flange Type




          Other Information
          • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
          • Minimum Order Quantity: 1 Piece
          • Port of Dispatch: Mumbai
          • Production Capacity: 500 Pieces per month
          • Delivery Time: 2 Weeks
          • Packaging Details: Wooden Cages

          Approx. Rs 21,600 / Piece

          Item Code: EMFM-0320

          DESCRIPTION

          FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

          WORKING PRINCIPLE

          This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

          TECHNICAL DETAIL

          Nominal Dia (mm) : 15 to 400

          Material of Construction : MS, SS 304, SS 316 & SS 316L

          Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

          Process Pressure : Max. 25 kg/cm2

          Process Temperature : Max. 150C

          Flow Tube Material : SS 316

          End Connection : Flange/Wafer

          Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

          Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

          Accuracy : ± 1% FSD Optional: ±0.5% FSD.

          Repeatability : 0.3%

          Display : 2 Line Alfa Numeric LCD

          Display Version : Integral /Remote

          Display Unit : Standard Unit in M3, Litre

          Power Supply : 230 VAC, 110 VAC & 24 VDC

          Output : Std. 4 – 20 mA

          Protection Class for Sensor : IP 65

          Protection Class for Transmitter : IP 65

          Cable Length for Remote : 10 meters.

          Installation : Inline Flange Type




          Other Information
          • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
          • Minimum Order Quantity: 1 Piece
          • Port of Dispatch: Mumbai
          • Production Capacity: 500 Piece per month
          • Delivery Time: 2 weeks
          • Packaging Details: Wooden Cages

          Approx. Rs 21,600 / Piece

          Item Code: EMFM-0705

          FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.


          Working Principle:

          • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

          Applications:

          • Scientific laboratory
          • Research centres
          • Chemical industries

          Specifications:

          • Nominal Dia (mm): 15 to 400
          • Material of Construction: MS, SS 304, SS 316 & SS 316L
          • Process Pressure: Max. 25 kg/cm2
          • Process Temperature: Max. 150C
          • Nominal Dia (mm) : 15 to 400
          • Material of Construction : MS, SS 304, SS 316 & SS 316L
          • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
          • Process Pressure : Max. 25 kg/cm2
          • Process Temperature : Max. 150C
          • Flow Tube Material : SS 316
          • End Connection : Flange/Wafer
          • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
          • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
          • Accuracy : ± 1% FSD Optional: ±0.5% FSD
          • Repeatability : 0.3%
          • Display : 2 Line Alfa Numeric LCD
          • Display Version : Integral /Remote
          • Display Unit : Standard Unit in M3, Litre
          • Power Supply : 230 VAC, 110 VAC & 24 VDC
          • Output : Std. 4 – 20 mA
          • Protection Class for Sensor : IP 65
          • Protection Class for Transmitter : IP 65
          • Cable Length for Remote : 10 meters
          • Installation : Inline Flange Type



            Other Information
            • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
            • Minimum Order Quantity: 1 Piece
            • Port of Dispatch: Mumbai
            • Production Capacity: 500 Piece per Month
            • Delivery Time: 2 weeks
            • Packaging Details: Wooden Cages

            Approx. Rs 21,600 / Piece(s)

            Item Code: EMFM-0583

            DESCRIPTION

            FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

            WORKING PRINCIPLE

            This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            TECHNICAL DETAIL

            Nominal Dia (mm) : 15 to 400

            Material of Construction : MS, SS 304, SS 316 & SS 316L

            Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

            Process Pressure : Max. 25 kg/cm2

            Process Temperature : Max. 150C

            Flow Tube Material : SS 316

            End Connection : Flange/Wafer

            Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

            Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

            Accuracy : ± 1% FSD Optional: ±0.5% FSD.

            Repeatability : 0.3%

            Display : 2 Line Alfa Numeric LCD

            Display Version : Integral /Remote

            Display Unit : Standard Unit in M3, Litre

            Power Supply : 230 VAC, 110 VAC & 24 VDC

            Output : Std. 4 – 20 mA

            Protection Class for Sensor : IP 65

            Protection Class for Transmitter : IP 65

            Cable Length for Remote : 10 meters.

            Installation : Inline Flange Type




            Other Information
            • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
            • Minimum Order Quantity: 1 Piece(s)
            • Port of Dispatch: Mumbai
            • Production Capacity: 500 pieces per month
            • Delivery Time: 2 weeks
            • Packaging Details: wooden cages

            Approx. Rs 21,600 / Piece(s)

            Item Code: EMFM-099

            Working Principle:

            • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            Applications:

            • Scientific laboratory
            • Research centres
            • Chemical industries

            Specifications:

            • Nominal Dia (mm): 15 to 400
            • Material of Construction: MS, SS 304, SS 316 & SS 316L
            • Process Pressure: Max. 25 kg/cm2
            • Process Temperature: Max. 150C
            • Nominal Dia (mm) : 15 to 400
            • Material of Construction : MS, SS 304, SS 316 & SS 316L
            • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
            • Process Pressure : Max. 25 kg/cm2
            • Process Temperature : Max. 150C
            • Flow Tube Material : SS 316
            • End Connection : Flange/Wafer
            • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
            • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
            • Accuracy : ± 1% FSD Optional: ±0.5% FSD
            • Repeatability : 0.3%
            • Display : 2 Line Alfa Numeric LCD
            • Display Version : Integral /Remote
            • Display Unit : Standard Unit in M3, Litre
            • Power Supply : 230 VAC, 110 VAC & 24 VDC
            • Output : Std. 4 – 20 mA
            • Protection Class for Sensor : IP 65
            • Protection Class for Transmitter : IP 65
            • Cable Length for Remote : 10 meters
            • Installation : Inline Flange Type


            Other Information
            • Minimum Order Quantity: 1 Piece(s)
            • Port of Dispatch: Mumbai
            • Production Capacity: 500 pieces per month
            • Delivery Time: 2 week
            • Packaging Details: wooden cages

            Approx. Rs 21,600 / Piece

            Item Code: EMFM-01

            DESCRIPTION

            FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

            WORKING PRINCIPLE

            This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            TECHNICAL DETAIL

            Nominal Dia (mm) : 15 to 400

            Material of Construction : MS, SS 304, SS 316 & SS 316L

            Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

            Process Pressure : Max. 25 kg/cm2

            Process Temperature : Max. 150C

            Flow Tube Material : SS 316

            End Connection : Flange/Wafer

            Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

            Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

            Accuracy : ± 1% FSD Optional: ±0.5% FSD.

            Repeatability : 0.3%

            Display : 2 Line Alfa Numeric LCD

            Display Version : Integral /Remote

            Display Unit : Standard Unit in M3, Litre

            Power Supply : 230 VAC, 110 VAC & 24 VDC

            Output : Std. 4 – 20 mA

            Protection Class for Sensor : IP 65

            Protection Class for Transmitter : IP 65

            Cable Length for Remote : 10 meters.

            Installation : Inline Flange Type




            Other Information
            • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
            • Minimum Order Quantity: 1 Piece
            • Port of Dispatch: Mumbai
            • Production Capacity: 500 Pieces per month
            • Delivery Time: 1 week
            • Packaging Details: Wooden cages

            Approx. Rs 21,600 / Piece

            Item Code: EMFM-0981

            Working Principle:

            • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            Applications:

            • Scientific laboratory
            • Research centres
            • Chemical industries

            Specifications:

            • Nominal Dia (mm): 15 to 400
            • Material of Construction: MS, SS 304, SS 316 & SS 316L
            • Process Pressure: Max. 25 kg/cm2
            • Process Temperature: Max. 150C
            • Nominal Dia (mm) : 15 to 400
            • Material of Construction : MS, SS 304, SS 316 & SS 316L
            • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
            • Process Pressure : Max. 25 kg/cm2
            • Process Temperature : Max. 150C
            • Flow Tube Material : SS 316
            • End Connection : Flange/Wafer
            • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
            • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
            • Accuracy : ± 1% FSD Optional: ±0.5% FSD
            • Repeatability : 0.3%
            • Display : 2 Line Alfa Numeric LCD
            • Display Version : Integral /Remote
            • Display Unit : Standard Unit in M3, Litre
            • Power Supply : 230 VAC, 110 VAC & 24 VDC
            • Output : Std. 4 – 20 mA
            • Protection Class for Sensor : IP 65
            • Protection Class for Transmitter : IP 65
            • Cable Length for Remote : 10 meters
            • Installation : Inline Flange Type


            Other Information
            • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
            • Minimum Order Quantity: 1 Piece
            • Port of Dispatch: Mumbai
            • Production Capacity: 75 per month
            • Delivery Time: 2 week
            • Packaging Details: Wooden Cages

            Approx. Rs 21,600 / Piece(s)

            Item Code: EMF-51

            Working Principle:

            • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            Applications:

            • Scientific laboratory
            • Research centres
            • Chemical industries

            Specifications:

            • Nominal Dia (mm): 15 to 400
            • Material of Construction: MS, SS 304, SS 316 & SS 316L
            • Process Pressure: Max. 25 kg/cm2
            • Process Temperature: Max. 150C
            • Nominal Dia (mm) : 15 to 400
            • Material of Construction : MS, SS 304, SS 316 & SS 316L
            • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
            • Process Pressure : Max. 25 kg/cm2
            • Process Temperature : Max. 150C
            • Flow Tube Material : SS 316
            • End Connection : Flange/Wafer
            • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
            • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
            • Accuracy : ± 1% FSD Optional: ±0.5% FSD
            • Repeatability : 0.3%
            • Display : 2 Line Alfa Numeric LCD
            • Display Version : Integral /Remote
            • Display Unit : Standard Unit in M3, Litre
            • Power Supply : 230 VAC, 110 VAC & 24 VDC
            • Output : Std. 4 – 20 mA
            • Protection Class for Sensor : IP 65
            • Protection Class for Transmitter : IP 65
            • Cable Length for Remote : 10 meters
            • Installation : Inline Flange Type


            Other Information
            • Minimum Order Quantity: 1 Piece(s)
            • Port of Dispatch: Mumbai
            • Production Capacity: 500 Pieces Per Month
            • Delivery Time: 2 weeks
            • Packaging Details: Wooden Cages

            Approx. Rs 21,600 / Piece(s)

            Item Code: EMF-089

            DESCRIPTION

            FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

            WORKING PRINCIPLE

            This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

            TECHNICAL DETAIL

            Nominal Dia (mm) : 15 to 400

            Material of Construction : MS, SS 304, SS 316 & SS 316L

            Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

            Process Pressure : Max. 25 kg/cm2

            Process Temperature : Max. 150C

            Flow Tube Material : SS 316

            End Connection : Flange/Wafer

            Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

            Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

            Accuracy : ± 1% FSD Optional: ±0.5% FSD.

            Repeatability : 0.3%

            Display : 2 Line Alfa Numeric LCD

            Display Version : Integral /Remote

            Display Unit : Standard Unit in M3, Litre

            Power Supply : 230 VAC, 110 VAC & 24 VDC

            Output : Std. 4 – 20 mA

            Protection Class for Sensor : IP 65

            Protection Class for Transmitter : IP 65

            Cable Length for Remote : 10 meters.

            Installation : Inline Flange Type




              Other Information
              • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
              • Minimum Order Quantity: 1 Piece(s)
              • Port of Dispatch: Mumbai
              • Production Capacity: 500 Pieces per month
              • Delivery Time: 2 week
              • Packaging Details: Wooden Cages

              Approx. Rs 21,600 / Piece

              Item Code: EMFM-007

              DESCRIPTION

              FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

              WORKING PRINCIPLE

              This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

              TECHNICAL DETAIL

              Nominal Dia (mm) : 15 to 400

              Material of Construction : MS, SS 304, SS 316 & SS 316L

              Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

              Process Pressure : Max. 25 kg/cm2

              Process Temperature : Max. 150C

              Flow Tube Material : SS 316

              End Connection : Flange/Wafer

              Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

              Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

              Accuracy : ± 1% FSD Optional: ±0.5% FSD.

              Repeatability : 0.3%

              Display : 2 Line Alfa Numeric LCD

              Display Version : Integral /Remote

              Display Unit : Standard Unit in M3, Litre

              Power Supply : 230 VAC, 110 VAC & 24 VDC

              Output : Std. 4 – 20 mA

              Protection Class for Sensor : IP 65

              Protection Class for Transmitter : IP 65

              Cable Length for Remote : 10 meters.

              Installation : Inline Flange Type




              Other Information
              • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
              • Minimum Order Quantity: 1 Piece
              • Port of Dispatch: Mumbai
              • Production Capacity: 500 Pieces per month
              • Delivery Time: 2 week
              • Packaging Details: Wooden Cages

              Approx. Rs 21,600 / Piece

              Item Code: EMFM-054

              DESCRIPTION

              FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

              WORKING PRINCIPLE

              This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

              TECHNICAL DETAIL

              Nominal Dia (mm) : 15 to 400

              Material of Construction : MS, SS 304, SS 316 & SS 316L

              Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

              Process Pressure : Max. 25 kg/cm2

              Process Temperature : Max. 150C

              Flow Tube Material : SS 316

              End Connection : Flange/Wafer

              Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

              Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

              Accuracy : ± 1% FSD Optional: ±0.5% FSD.

              Repeatability : 0.3%

              Display : 2 Line Alfa Numeric LCD

              Display Version : Integral /Remote

              Display Unit : Standard Unit in M3, Litre

              Power Supply : 230 VAC, 110 VAC & 24 VDC

              Output : Std. 4 – 20 mA

              Protection Class for Sensor : IP 65

              Protection Class for Transmitter : IP 65

              Cable Length for Remote : 10 meters.

              Installation : Inline Flange Type




              Other Information
              • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
              • Minimum Order Quantity: 1 Piece
              • Port of Dispatch: Mumbai
              • Production Capacity: 500 piece per Month
              • Delivery Time: 2 Weeks
              • Packaging Details: Wooden Box & Box

              Approx. Rs 21,600 / Unit

              Item Code: SEMFM-0250

              Applications:

              • Scientific laboratory
              • Research centres
              • Chemical industries

              Specifications:

              • Nominal Dia (mm): 15 to 400
              • Material of Construction: MS, SS 304, SS 316 & SS 316L
              • Process Pressure: Max. 25 kg/cm2
              • Process Temperature: Max. 150C
              • Nominal Dia (mm) : 15 to 400
              • Material of Construction : MS, SS 304, SS 316 & SS 316L
              • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
              • Process Pressure : Max. 25 kg/cm2
              • Process Temperature : Max. 150C
              • Flow Tube Material : SS 316
              • End Connection : Flange/Wafer
              • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
              • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
              • Accuracy : ± 1% FSD Optional: ±0.5% FSD
              • Repeatability : 0.3%
              • Display : 2 Line Alfa Numeric LCD
              • Display Version : Integral /Remote
              • Display Unit : Standard Unit in M3, Litre
              • Power Supply : 230 VAC, 110 VAC & 24 VDC
              • Output : Std. 4 – 20 mA
              • Protection Class for Sensor : IP 65
              • Protection Class for Transmitter : IP 65
              • Cable Length for Remote : 10 meters
              • Installation : Inline Flange Type


              Other Information
              • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
              • Minimum Order Quantity: 1 Unit
              • Port of Dispatch: Mumbai
              • Production Capacity: 500 pieces per month
              • Delivery Time: 2 weeks
              • Packaging Details: Wooden cages

              Approx. Rs 400 / Piece(s)

              Item Code: SEMFM-0274

              Used for precision measurement of any conducting liquid or slurry that is flowing in closed pipes.

              • High Accuracy flow metering
              • Optional Digital Transmission
              • 2 Line Alpha numeric back lit display
              • No pressure drops in process.
              • Line size 15 NB to 300 NB
              • Accuracy = 1% of reading
              • Flow range 0.5 to 10 m/s
              • Easy maintenance as no moving parts
              • Min.conductivity : 5 us/cm
              • Output :4-20 ma,Relay and RS 485
              • Protection : Cast Aluminum lP 65 field / wall mounted
              • Process Temp: + 150 degree max.
              • Lining : PTFE / Rubber / PP


              Other Information
              • Minimum Order Quantity: 1 Piece(s)
              • Port of Dispatch: Mumbai
              • Production Capacity: 500 Pieces per month
              • Delivery Time: 2 weeks
              • Packaging Details: Wooden Box

              Approx. Rs 21,600 / Piece

              Item Code: EMFM-0888

              FLOWTECH Make Sanitary Electro Magnetic Flow Meters are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.


              Working Principle:

              • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

              Applications:

              • Scientific laboratory
              • Research centres
              • Chemical industries

              Specifications:

              • Nominal Dia (mm): 15 to 400
              • Material of Construction: MS, SS 304, SS 316 & SS 316L
              • Process Pressure: Max. 25 kg/cm2
              • Process Temperature: Max. 150C
              • Nominal Dia (mm) : 15 to 400
              • Material of Construction : MS, SS 304, SS 316 & SS 316L
              • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
              • Process Pressure : Max. 25 kg/cm2
              • Process Temperature : Max. 150C
              • Flow Tube Material : SS 316
              • End Connection : Flange/Wafer
              • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
              • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
              • Accuracy : ± 1% FSD Optional: ±0.5% FSD
              • Repeatability : 0.3%
              • Display : 2 Line Alfa Numeric LCD
              • Display Version : Integral /Remote
              • Display Unit : Standard Unit in M3, Litre
              • Power Supply : 230 VAC, 110 VAC & 24 VDC
              • Output : Std. 4 – 20 mA
              • Protection Class for Sensor : IP 65
              • Protection Class for Transmitter : IP 65
              • Cable Length for Remote : 10 meters
              • Installation : Inline Flange Type


                Other Information
                • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
                • Minimum Order Quantity: 1 Piece
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 Pieces Per Month
                • Delivery Time: 2 weeks
                • Packaging Details: Wooden cages

                Approx. Rs 21,600 / Piece

                Item Code: EMFM-0634

                Working Principle:

                • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                Applications:

                • Scientific laboratory
                • Research centres
                • Chemical industries

                Specifications:

                • Nominal Dia (mm): 15 to 400
                • Material of Construction: MS, SS 304, SS 316 & SS 316L
                • Process Pressure: Max. 25 kg/cm2
                • Process Temperature: Max. 150C
                • Nominal Dia (mm) : 15 to 400
                • Material of Construction : MS, SS 304, SS 316 & SS 316L
                • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
                • Process Pressure : Max. 25 kg/cm2
                • Process Temperature : Max. 150C
                • Flow Tube Material : SS 316
                • End Connection : Flange/Wafer
                • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
                • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
                • Accuracy : ± 1% FSD Optional: ±0.5% FSD
                • Repeatability : 0.3%
                • Display : 2 Line Alfa Numeric LCD
                • Display Version : Integral /Remote
                • Display Unit : Standard Unit in M3, Litre
                • Power Supply : 230 VAC, 110 VAC & 24 VDC
                • Output : Std. 4 – 20 mA
                • Protection Class for Sensor : IP 65
                • Protection Class for Transmitter : IP 65
                • Cable Length for Remote : 10 meters
                • Installation : Inline Flange Type


                Other Information
                • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
                • Minimum Order Quantity: 1 Piece
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 piece per Month
                • Delivery Time: 2 Weeks
                • Packaging Details: Wooden cages

                Approx. Rs 21,600 / Piece

                Item Code: WM-0644

                ADDMAS full bore meter is a cost effective flow meter for conductive liquids such as Raw Water, effluents, Potable water and industrial chemical. Using time proven electromagnetic flow metering principle, ADDMAS flow meters are available for pipes from ½” NB to 6” NB. Since there are no moving parts, the flow meter gives years of maintenance free service. Its performance is independence of temperature, pressure, density and viscosity of medium. The Water Flow Meter is obstruction less and hence the pressure drop is almost negligible. ADDMAS has all the features required in field mountable metering equipment. These include-weather proof / flame proof enclosure, RS485 communication option , with 4 to 20 mA isolated Current output for Flow signal transmission option for process control. The converter is available as field mounted – IP65 protection category. An optional batching controller also available on request.It works on Faraday’s Law of Electromagnetic induction. A magnetic field is generated by magnetic coil. The fluid flowing through this magnetic field generates EMF (Voltage) which is proportional to the flow velocity. This EMF is measured by the Electrodes giving corresponding output. Used for precision measurement of any conducting liquid or slurry that is flowing in closed pipes.

                 

                • High Accuracy flow metering
                • Optional Digital Transmission
                • 2 Line Alpha numeric back lit display
                • No pressure drops in process.
                • Line size 15 NB to 300 NB
                • Accuracy = 1% of reading
                • Flow range 0.5 to 10 m/s
                • Easy maintenance as no moving parts
                • Min.conductivity : 5 us/cm
                • Output :4-20 ma,Relay and RS485
                • Protection : Cast Aluminum lP65 field / wall mounted
                • Process Temp: + 150 degree max.
                • Lining : PTFE / Rubber / PP


                Other Information
                • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
                • Minimum Order Quantity: 1 Piece
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 Pieces per month
                • Delivery Time: 2 weeks
                • Packaging Details: Wooden cages

                Approx. Rs 21,600 / Piece

                Item Code: EMFM-063

                DESCRIPTION

                FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

                WORKING PRINCIPLE

                This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                TECHNICAL DETAIL

                Nominal Dia (mm) : 15 to 400

                Material of Construction : MS, SS 304, SS 316 & SS 316L

                Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

                Process Pressure : Max. 25 kg/cm2

                Process Temperature : Max. 150C

                Flow Tube Material : SS 316

                End Connection : Flange/Wafer

                Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

                Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

                Accuracy : ± 1% FSD Optional: ±0.5% FSD.

                Repeatability : 0.3%

                Display : 2 Line Alfa Numeric LCD

                Display Version : Integral /Remote

                Display Unit : Standard Unit in M3, Litre

                Power Supply : 230 VAC, 110 VAC & 24 VDC

                Output : Std. 4 – 20 mA

                Protection Class for Sensor : IP 65

                Protection Class for Transmitter : IP 65

                Cable Length for Remote : 10 meters.

                Installation : Inline Flange Type




                Other Information
                • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
                • Minimum Order Quantity: 1 Piece
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 Pieces per month
                • Delivery Time: 2 week
                • Packaging Details: Wooden cages

                Approx. Rs 21,600 / Set(s)

                Item Code: EMFM-0198

                FLOWTECH Make Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

                Working Principle:

                • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                Applications:

                • Scientific laboratory
                • Research centres
                • Chemical industries

                Specifications:

                • Nominal Dia (mm): 15 to 400
                • Material of Construction: MS, SS 304, SS 316 & SS 316L
                • Process Pressure: Max. 25 kg/cm2
                • Process Temperature: Max. 150C
                • Nominal Dia (mm) : 15 to 400
                • Material of Construction : MS, SS 304, SS 316 & SS 316L
                • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
                • Process Pressure : Max. 25 kg/cm2
                • Process Temperature : Max. 150C
                • Flow Tube Material : SS 316
                • End Connection : Flange/Wafer
                • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
                • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
                • Accuracy : ± 1% FSD Optional: ±0.5% FSD
                • Repeatability : 0.3%
                • Display : 2 Line Alfa Numeric LCD
                • Display Version : Integral /Remote
                • Display Unit : Standard Unit in M3, Litre
                • Power Supply : 230 VAC, 110 VAC & 24 VDC
                • Output : Std. 4 – 20 mA
                • Protection Class for Sensor : IP 65
                • Protection Class for Transmitter : IP 65
                • Cable Length for Remote : 10 meters
                • Installation : Inline Flange Type


                Other Information
                • Minimum Order Quantity: 1 Set(s)
                • Port of Dispatch: Set
                • Production Capacity: 250 pieces per month
                • Delivery Time: 2 week
                • Packaging Details: wooden cages

                Approx. Rs 21,600 / Piece(s)

                Item Code: EMFM-0162

                Working Principle:

                • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                Applications:

                • Scientific laboratory
                • Research centres
                • Chemical industries

                Specifications:

                • Nominal Dia (mm): 15 to 400
                • Material of Construction: MS, SS 304, SS 316 & SS 316L
                • Process Pressure: Max. 25 kg/cm2
                • Process Temperature: Max. 150C
                • Nominal Dia (mm) : 15 to 400
                • Material of Construction : MS, SS 304, SS 316 & SS 316L
                • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
                • Process Pressure : Max. 25 kg/cm2
                • Process Temperature : Max. 150C
                • Flow Tube Material : SS 316
                • End Connection : Flange/Wafer
                • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
                • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
                • Accuracy : ± 1% FSD Optional: ±0.5% FSD
                • Repeatability : 0.3%
                • Display : 2 Line Alfa Numeric LCD
                • Display Version : Integral /Remote
                • Display Unit : Standard Unit in M3, Litre
                • Power Supply : 230 VAC, 110 VAC & 24 VDC
                • Output : Std. 4 – 20 mA
                • Protection Class for Sensor : IP 65
                • Protection Class for Transmitter : IP 65
                • Cable Length for Remote : 10 meters
                • Installation : Inline Flange Type


                Other Information
                • Minimum Order Quantity: 1 Piece(s)
                • Port of Dispatch: Piece
                • Production Capacity: 100 Pieces per month
                • Delivery Time: 2 week
                • Packaging Details: wooden cages

                Approx. Rs 21,600 / Piece

                Item Code: EMFM-0133

                Working Principle:

                • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                Applications:

                • Scientific laboratory
                • Research centres
                • Chemical industries

                Specifications:

                • Nominal Dia (mm): 15 to 400
                • Material of Construction: MS, SS 304, SS 316 & SS 316L
                • Process Pressure: Max. 25 kg/cm2
                • Process Temperature: Max. 150C
                • Nominal Dia (mm) : 15 to 400
                • Material of Construction : MS, SS 304, SS 316 & SS 316L
                • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
                • Process Pressure : Max. 25 kg/cm2
                • Process Temperature : Max. 150C
                • Flow Tube Material : SS 316
                • End Connection : Flange/Wafer
                • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
                • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
                • Accuracy : ± 1% FSD Optional: ±0.5% FSD
                • Repeatability : 0.3%
                • Display : 2 Line Alfa Numeric LCD
                • Display Version : Integral /Remote
                • Display Unit : Standard Unit in M3, Litre
                • Power Supply : 230 VAC, 110 VAC & 24 VDC
                • Output : Std. 4 – 20 mA
                • Protection Class for Sensor : IP 65
                • Protection Class for Transmitter : IP 65
                • Cable Length for Remote : 10 meters
                • Installation : Inline Flange Type


                Other Information
                • Minimum Order Quantity: 1 Piece
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 Pieces per month
                • Delivery Time: 2 weeks
                • Packaging Details: Wooden Cage

                Approx. Rs 21,600 / Flow Meter

                Item Code: EMFM-121

                Working Principle:

                • This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                Applications:

                • Scientific laboratory
                • Research centres
                • Chemical industries

                Specifications:

                • Nominal Dia (mm): 15 to 400
                • Material of Construction: MS, SS 304, SS 316 & SS 316L
                • Process Pressure: Max. 25 kg/cm2
                • Process Temperature: Max. 150C
                • Nominal Dia (mm) : 15 to 400
                • Material of Construction : MS, SS 304, SS 316 & SS 316L
                • Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
                • Process Pressure : Max. 25 kg/cm2
                • Process Temperature : Max. 150C
                • Flow Tube Material : SS 316
                • End Connection : Flange/Wafer
                • Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
                • Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
                • Accuracy : ± 1% FSD Optional: ±0.5% FSD
                • Repeatability : 0.3%
                • Display : 2 Line Alfa Numeric LCD
                • Display Version : Integral /Remote
                • Display Unit : Standard Unit in M3, Litre
                • Power Supply : 230 VAC, 110 VAC & 24 VDC
                • Output : Std. 4 – 20 mA
                • Protection Class for Sensor : IP 65
                • Protection Class for Transmitter : IP 65
                • Cable Length for Remote : 10 meters
                • Installation : Inline Flange Type


                Other Information
                • Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
                • Minimum Order Quantity: 1 Flow Meter
                • Port of Dispatch: Mumbai
                • Production Capacity: 500 piece per Month
                • Delivery Time: 2 weeks
                • Packaging Details: Wooden Cages

                Approx. Rs 21,600 / Piece(s)

                DESCRIPTION

                FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

                WORKING PRINCIPLE

                This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

                TECHNICAL DETAIL

                Nominal Dia (mm) : 15 to 400

                Material of Construction : MS, SS 304, SS 316 & SS 316L

                Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum

                Process Pressure : Max. 25 kg/cm2

                Process Temperature : Max. 150C

                Flow Tube Material : SS 316

                End Connection : Flange/Wafer

                Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF

                Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum

                Accuracy : ± 1% FSD Optional: ±0.5% FSD.

                Repeatability : 0.3%

                Display : 2 Line Alfa Numeric LCD

                Display Version : Integral /Remote

                Display Unit : Standard Unit in M3, Litre

                Power Supply : 230 VAC, 110 VAC & 24 VDC

                Output : Std. 4 – 20 mA

                Protection Class for Sensor : IP 65

                Protection Class for Transmitter : IP 65

                Cable Length for Remote : 10 meters.

                Installation : Inline Flange Type



                Other Information
                • Minimum Order Quantity: 1 Piece(s)
                 

                Flowtech Measuring Instruments Private Limited

                Nilesh Shah (Director)
                No. 900 / 2 - B, G. I. D. C., Makarpura, Near Pakona Engineering
                Vadodara - 390010
                Gujarat, India
                © Flowtech Measuring Instruments Private Limited. All Rights Reserved (Terms of Use)
                Developed and Managed by IndiaMART InterMESH Limited