Metal Variable Area Type Flow Meter are designed to measure flow rate of liquids and gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and float. A magnet encapsulated in float couples with rotating magnets are connected to an indicating pointer. Henceforth, the movement of the float is accurately indicated in terms of flowrate. They are intended for application where high pressure, temperature or corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area Type Flow meter design to measure flow rate of Liquids & Gases under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulates in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate.
When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area of the float.
Based on Bemoulli's theorem, the principle mentioned above can be theoretically expressed as follows.
Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.
Accuracy : ± 2% of FSD
Rangeability : 10:1
Repeatability : ± 0.5%
Temperature Rating : -200 to 300°C
Pressure Rating : 40 Bar
Flow Direction : Bottom to Top
Connections : Flanged, TC End and Screwed
Enclosure : IP 65 Weatherproof / Flame Proof
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
End Connector | BSP (M) , BSP (F) , TC END & FLANGED |
Tube Body Construction | Stainless Steel |
Line Size | 15 NB TO 150 NB Available |
Maximum Temperatures | 250 Deg C |
Brand | Flowtech |
Float Material | SS.316 |
Operating Pressure | 3 kg/cm2 |
Range Ability | 150 LPH to 2,00,000 LPH |
Usage/Application | Water |
Application | Industrial |
Power Supply | 24 V DC |
Repeatability | 1% FSD |
Pressure Ratings | 40 Bar |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 1 : 10 |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Temperature Ratings | - 20 Deg C to 250 Deg C |
Enclosure | IP 55 OR IP 65 |
Accuracy | - 2% F.S.D |
Repeatability | 0.5 % |
Rangebility | 10:1 |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 18,000 /Piece Get Latest Price
Tube Body Construction | Stainless Steel |
Float Material | SS316 |
Model Name/Number | FMIPL-MTRM-108 |
Brand | Flowtech |
Application Media | Liquid & Gas |
Country of Origin | Made in India |
Connections | Flanged or Screwed |
Enclosure | IP 65 |
Temperature Ratings | - 20 Deg C to 250 Deg C |
Accuracy | +/- 2% f. S. D. |
Repeatability | 0. 5 % |
Scale Length | 180 Degree Angular |
Pressure Ratings | 40 Bar |
Minimum order quantity: 1 Piece
“Flowtech” make digital metal tube rotameter is used for flow measurement where current output with totaliser is required.
Design Features:
“Flowtech” metal tube variable area flow meters (rotameter) are intended for application where high pressure, temperature or corrosive conditions preclude the use of conventional glass tube. These are all metal variable area type flow meter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulate in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate.
Technical Detail:
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 1 : 10 |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Connections | Flanged OR Screwed |
Enclosure | IP 55 OR IP 65 |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Rangeability | 10:1 |
Scale Length | 180 Deg Angular |
Pressure Ratings | 40 Bar |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 18,000 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Industrial |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Accuracy | - 2% F.S.D. |
Enclosure | IP 55 OR IP 65 |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Digital Meter :
The Digital Metal Tube Rotameter is used for flow measurement where current output with totaliser is required. Metal Tube Rotameters are rugged, versatile and accurate variable area (VA) flow meter offering 2.0% full scale accuracy.
The inner float magnetic field is detected by the highly sensitive magnetic field detection sensor, enable us to show the digital readout. As such this flow meter does not require any electrical connection, sinceit operates on battery. It has an inbuilt two wire transmitter provide 24 V DC and take 4 - 20 mA output signal.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 18,000 /Piece Get Latest Price
Tube Body Construction | Stainless Steel |
Range Ability | 100 LPH |
Brand | Flowtech |
Application | Industrial |
Model Name/Number | FMIPL-DMTRM-108 |
Float Material | SS.316 |
Accuracy | - 2% F.S.D. |
Rangebility | 10 : 1 |
Scale length | 180 Degree Angular |
Repeatability | 0.5 % |
Minimum order quantity: 1 Piece
DESCRIPTION.
“FLOWTECH” make Digital Metal Tube Rotameter is used for flow measurement where current output with totaliser is required.
WORKING PRINCIPLE
The Digital Metal Tube Rotameter is used for flow measurement where current output with totaliser is required. Metal Tube Rotameters are rugged, versatile and accurate variable area (VA) flow meter offering 2.0% full scale accuracy.
The inner float magnetic field is detected by the highly sensitive magnetic field detection sensor, enable us to show the digital readout. As such this flow meter does not require any electrical connection, since it operates on battery. It has an inbuilt two wire transmitter provide 24 V DC and take 4 - 20 mA output signal.
Design features :
1. Simplified piping and reduced space requirements
2. Permanent magnetic link between metering float and motion position transmitter
3. Precision swaged metering tube
4. Guide cartridges easily removable for cleaning
5. Provide with Electrical transmitter, flow indicator or alarm
6. Available F/F Height in 250, 300, 350, 450, 500 mm
7. Available Flange size 15 NB to 200 NB & Flow 200 LPH to 1,50,000 LPH
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTR-108 |
Usage/Application | Water |
Range Ability | 1 : 10 |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Repeatability | 0.5 % |
Scale Length | 180 Deg Angular |
Minimum order quantity: 1 Piece
Magnetic Rotameter from our side are an ace product in the market. It consists of a tapered metal tube, an indicating assembly and a float. A magnet capsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate. These are made available to the client at extremely feasible rates and as per the industry protocols.
Features:
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Scale Length | 180 degree Angular |
Pressure Ratings | 40 Bar |
Accuracy | - 2% F.S.D. |
Repeatability | 0.5 % |
Rangebility | 10:1 |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Connections | Flanged OR Screwed |
Pressure Ratings | 40 Bar |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Tube Body Construction | Stainless Steel |
Range Ability | 1 : 10 |
Usage/Application | Water |
Model Name/Number | FMIPL-MTRM-108 |
Application | Industrial |
Brand | Flowtech |
Float Material | SS.316 |
Scale Length | 180 degree Angular |
Rangeability | 101 |
Accuracy | -2% F.S.D. |
Repeatability | 0.5 % |
Minimum order quantity: 1 Piece
DESCRIPTION:
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameter) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flow meter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsulate in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flow rate.
DESIGN FEATURES:
??? Simplified piping and reduced space requirements.
??? Permanent magnetic link between metering float and motion position transmitter.
??? Precision swaged metering tube.
??? Heavy duty welded float and guide construction.
??? Guide cartridges easily removable for cleaning
??? Provide with Electrical transmitter, flow indicator or alarm.
??? Available F/F Height in 250, 350,450,500 mm.
??? Available Flange size 15 NB to 200 NB & Flow 200 LPH to 2,00,000 LPH.
Other Details:
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Water |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Application | Industrial |
Brand | Flowtech |
Accuracy | - 2% F.S.D. |
Repeatability | 10:1 |
Rangebility | 10:1 |
Scale Length | 180 degree Angular |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Industrial |
Range Ability | 150 LPH to 2,00,000 LPH |
Tube Body Construction | Stainless Steel |
Float Material | SS.316 |
Brand | Flowtech |
Application | Industrial |
Rangeability | 10:1 |
Temperature Ratings | - 20 Deg C to 250 Deg C |
Accuracy | - 2% F.S.D. |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic)
Description :
“FLOWTECH” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
₹ 7,200 /Piece Get Latest Price
Model Name/Number | FMIPL-MTRM-108 |
Usage/Application | Gas |
Range Ability | 1 : 10 |
Tube Body Construction | Stainless Steel |
Float Material | SS316 |
Application | Industrial |
Brand | Flowtech |
Accuracy | - 2% F.S.D. |
Repeatability | 0.5% |
Pressure Ratings | 40 Bar |
Scale length | 180 degree Angular |
Minimum order quantity: 1 Piece
Metal Tube Rotameter (Magnetic) “Flowtech” Metal Tube Variable Area Flow Meters (Rotameters) are intended for application where high pressure, temperature OR corrosive conditions preclude the use of conventional glass tube. These are all Metal Variable Area type Flowmeter design to measure flow rate of liquids, gases & steam under critical conditions. It consists of a tapered metal tube, an indicating assembly and a float. A magnet encapsuled in float couples with rotating magnets connected to an indicating pointer, thus the movement of the float, is accurately indicated in terms of flowrate.
Other Details:
Suitable to measure flow rate of opaque/translucent liquid, gases Steam and vapour under critical operating conditions.
Nilesh Shah (Director)
Flowtech Measuring Instruments Private Limited
No. 900, 2 B, G I D C, Makarpura
Vadodara - 390010, Gujarat, India