Flowtech Measuring Instruments Private Limited
ISO 9001:2008 Certified
Makarpura, Vadodara, Gujarat
Send E-mail
Send SMS
Home»Our Products»

Orifice Assembly And Plates


Description:

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FlowtechmakeOrificeflangeassembliesare used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Orifice Plates Water Flow Meter is an ace product from our side. These products from our side are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity. This one is efficient enough to provide an acceptable level of uncertainties at superior performance and low maintenance without regular follow-ups.

Features:

  • Correct flow measurement
  • Accurate results
  • Easy to maintain

Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:

  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm

Additional Information:
  • Item Code: OPFA-0996
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayDigital
BrandFlowtech
Orifice Plate Meter gives an acceptable level of uncertainties at lowest cost and long life without regular maintenance. These products from our side are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of differential pressure created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Features:
  • Flow measurement
  • Perfect results
  • Simple to maintain
Applications:
  • Scientific laboratory
  • Research centres
  • Chemical industries
Specifications:
  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Unit
Get Best Quote
Product Details:
Size2 inch, 3 inch, 2 TO 30 inch
BrandFLOWTECH
Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries
Specifications:
  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Item Code: OPFA-0115
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Item Code: OPFA-0941
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: wooden cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.
Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0543
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Unit
Get Best Quote
Applications:

  • Scientific laboratory
  • Research centers
  • Chemical industries

Specifications:


  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Item Code: OPFA-0348
  • Port of Dispatch: Baroda
  • Production Capacity: 500 piece per Month
  • Delivery Time: 2 Weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
BrandFLOWTECH
Material StandardASTM A105, ANSI B16.5

Description:

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

'Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake Orifice Flange Assemblies are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenance. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • Accuracy- Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0813
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 110 / Unit
Get Best Quote
Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Item Code: OPFA-0790
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH

Additional Information:
  • Item Code: OPFA-0826
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece(s)
Get Best Quote

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0512
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042 

   

FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-089
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandFLOWTECH
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-098
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Baroda
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 week
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size2 inch, 3 inch, 2 TO 30 INCH
BrandFLOWTECH

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042.

Additional Information:
  • Item Code: OPFA-0244
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 100
  • Delivery Time: 2 Week
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size2 inch, 3 inch
BrandFLOWTECH
  • Description:

    Flowtech"Make Orifice Plates & Flange Assemblies.

    Suitable for creating differential pressure in a pipe line for flow transmitter etc.

    Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

    • Available in SS-316/P.P.Material.
    • Design standard confirm to BS 1042" ""

    FOWTECH"make"ORIFICE FLANGE ASSEMBLIES"are used for measuring flow of various Liquids, Gases & Steam from 1 ½”"to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

    Design Standards

    • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
    • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
    • ACCURACY - Within /- 1 %
    • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for"" Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0111
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 pieces per month
  • Delivery Time: 2weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.
  • Display Analog

Additional Information:
  • Item Code: OPFA-0428
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH

Description:
Flowtech Make Orifice Plates & Flange Assemblies.

 Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042 

 

Flowtech make Orifice flange assemblies are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0308
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

 

 

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

 

 

 

 

 

 


Additional Information:
  • Item Code: OPFA-0487
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayAnalog
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

 Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042 

 

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0433
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch, 20-30 inch
Material StandardASTM A105, ANSI B16.5
BrandFLOWTECH
Description:

  • Flowtech Make Orifice Plates & Flange Assemblies.
  • Suitable for creating differential pressure in a pipe line for flow transmitter etc.
  • Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042
  • FOWTECH make Orifice Flange Assembly are used for measuring flow of various Liquids, Gases & Steam from
  • 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances.
  • Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards:

  • Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • Orifice Bore - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • Accuracy - Within /- 1 %
  • Vent / Drain - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0247
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 pieces per month
  • Delivery Time: 2 Week
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Unit
Get Best Quote
Product Details:
Size2 inch, 3 inch, 3 inch, 2 TO 30 INCH, 2 TO 30 INCH
BrandFLOWTECH, FLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: lhkb
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 week
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size2 inch, 3 inch
BrandFLOWTECH

DESCRIPTION :

 

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

 

 

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

 

 

 

 

 

 


Additional Information:
  • Item Code: OPFA-095
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayAnalog
BrandFLOWTECH, FLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0840
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces Per Month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0732
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Size1-5 inch, 5-10 inch, 10-20 inch
Material StandardASTM A105, ANSI B16.5, ANSI B16.5
BrandFLOWTECH, FLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0186
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayAnalog
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-03
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece(s)
Get Best Quote

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

FOWTECHmake ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0422
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayAnalog
BrandFLOWTECH, FLOWTECH
MaterialSS

Description :

Flowtech Make Orifice Plates & Flange Assemblies.

Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042

 

Fowtech Make Orifice Flange Assemblies Are Used For Measuring Flow Of Various Liquids, Gases & Steam From

1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0223
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Applications:

  • Scientific laboratory
  • Research centres
  • Chemical industries

Specifications:


  • Available in SS-316/P.P. Material
  • 1 ½” to 24” line sizes
  • Design - confirming to isa rp 3. 2, dn 1952, bs 1042, iso-5167
  • Orifice bore - confirming to iso 5167 / bs 1042 / rw miller / l. K. Spink / age – 3
  • Accuracy - within /- 1 %
  • Vent / drain - vent or drain holes are provided as per customer’s requirement. Not drilled for orifice bore smaller than 25. 4 mm

Additional Information:
  • Item Code: OPFA-0695
  • Minimum Order Quantity: 1 Piece
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: wooden cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece(s)
Get Best Quote
Design Standards:

  • Design- Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • Accuracy - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-088
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 per Month
  • Delivery Time: 2 Weeks
  • Packaging Details: wooden cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece(s)
Get Best Quote
FOWTECHmake Orifice Plates and Flange Assemblies are used for measuring flow of various Liquids, Gases & Steam from 1 ½”to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards:

  • Design- Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • Orifice Bore- Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • Accuracy - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0168
  • Minimum Order Quantity: 1 Piece(s)
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 pieces per Month
  • Delivery Time: 2 Weeks
  • Packaging Details: wooden cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Size2 inch, 3 inch
BrandFLOWTECH
Flowtech make Orifice Plates and Flange Assembly are used for measuring flow of various Liquids, Gases & Steam from 1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

  • Flowtech Make Orifice Plates & Flange Assemblies.
  • Suitable for creating differential pressure in a pipe line for flow transmitter etc.
  • Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.
  • Available in SS-316/ P.P. Material.
  • Design standard confirm to BS 1042
  • Design Standards
  • Design - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • Orifice Bo re - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • Accuracy - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0123
  • Port of Dispatch: Mumbai
  • Production Capacity: 500 Pieces per month
  • Delivery Time: 2 weeks
  • Packaging Details: Wooden Cages
Yes! I am Interested
View PDF
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
UsageIndustrial, Domestic
BrandFlowtech
Specifications:
  • Size : 50 to 600 NB.
  • Round, Square & Rectangular Shape.
  • MOC : CS, SS-304, SS-316.
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
DisplayAnalog
BrandFLOWTECH

DESCRIPTION :

Flowtech Make Orifice Plates & Flange Assemblies.

 Suitable for creating differential pressure in a pipe line for flow transmitter etc.

Orifice flange assemblies’ consist of weld neck type flanges with studs, nuts, and gaskets.

  • Available in SS-316/P.P.Material.
  • Design standard confirm to BS 1042 

 

FOWTECH make ORIFICE FLANGE ASSEMBLIES are used for measuring flow of various Liquids, Gases & Steam from

1 ½” to 24” line sizes. It gives an acceptable level of uncertainties at lowest cost and long life without regular maintenances. Orifice Plates are most commonly used as primary element for flow measurement in pipelines based upon the principle of measurement of ‘Differential Pressure’ created when an obstruction is placed in the fluid flow, due to increase in fluid velocity.

Design Standards

  • DESIGN - Confirming to ISA RP 3.2, DN 1952, BS 1042, ISO-5167
  • ORIFICE BORE - Confirming to ISO 5167 / BS 1042 / RW Miller / L. K. SPINK / AGE – 3
  • ACCURACY - Within /- 1 %
  • VENT / DRAIN - Vent OR Drain holes are provided as per customer’s requirement. Not drilled for Orifice Bore smaller than 25.4 mm.

Additional Information:
  • Item Code: OPFA-0273
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 5000 Pieces per month
  • Delivery Time: 2 Week
  • Packaging Details: Wooden Cage
Yes! I am Interested
View PDF
X
 

Download Brochure
Flowtech Measuring Instruments Private Limited

Nilesh Shah (Director)
No. 900/2 B, G. I. D. C., Makarpura Near Pakona Engineering
Vadodara - 390010
Gujarat, India
Send Email
© Flowtech Measuring Instruments Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited