Flowtech Measuring Instrument Private Limited

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1500mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Digital Water Flow Meter Applications

Water flow meters can measure cold water, hot water, clean water, dirty water and slurries

Indian Market

Indian States: Telangana, Tamil Nadu, Mizoram, Jharkhand, Arunachal Pradesh, Manipur, Tripura, Kerala, Gujarat, Maharashtra, Madhya Pradesh, Rajasthan, Uttar Pradesh, Orissa, Uttarakhand, Assam, Sikkim, Nagaland, Chhattisgarh, Tamil Nadu, Jammu and Kashmir, Haryana, West Bengal, Goa, Delhi, Bihar, Punjab, etc.

International Market

Asian Countries: Indonesia, Thailand, Malaysia, Singapore, Nepal, Bangladesh, etc
Europe: France, Poland, Spain, etc
Gulf Countries: Saudi Arabia, United Arab Emirates,etc..

Flowtech Make Effluent Water Digital Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm): 15 to 1200mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD.
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Protection Class for Transmitter: IP 65Cable Length for Remote : 25 meters.Installation : Inline Flange Type.

Product Description:

Flowtech Make Battery Digital Electromagnetic Flow Meter Battery Operated principle is based on measuring electromotive force induced in electrically conductive liquid when it moves in magnetic field. The magnetic field is furnished in the flow sensor's inner channel by a special electromagnetic system.

Measurement : 

Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1500mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Digital Water Flow Meter Applications

Water flow meters can measure cold water, hot water, clean water, dirty water and slurries

 

Indian Market

Indian States: Telangana, Tamil Nadu, Mizoram, Jharkhand, Arunachal Pradesh, Manipur, Tripura, Kerala, Gujarat, Maharashtra, Madhya Pradesh, Rajasthan, Uttar Pradesh, Orissa, Uttarakhand, Assam, Sikkim, Nagaland, Chhattisgarh, Tamil Nadu, Jammu and Kashmir, Haryana, West Bengal, Goa, Delhi, Bihar, Punjab, etc.

International Market

Asian Countries: Indonesia, Thailand, Malaysia, Singapore, Nepal, Bangladesh, etc
Europe: France, Poland, Spain, etc
Gulf Countries: Saudi Arabia, United Arab Emirates,etc..