Electromagnetic Flow Meters

Product Details:

Flowtech Battery Operator Electromagnetic Flow Meter operation principle is based on measuring electromotive force induced in electrically conductive liquid when it moves in magnetic field. The magnetic field is furnished in the flow sensor's inner channel by a special electromagnetic system.

Inductive electromotive force (EMP) E is proportional to the mean flow velocity v, distance between the electrodes d (which is equal to the sensor's inner diameter), and magnetic field strength E = v ×d×B×k.

Specifications:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFMBO-099
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Piece per month
• Delivery Time: 1 Week
• Packaging Details: Wooden Cages & Plywood Box

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Additional Information:

• Item Code: EMF-01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden cages

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Additional Information:

• Item Code: EMFM-02
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 2 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘C’, & Tantalum
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/TC END
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1% FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30 meters
• Installation: Inline Flange Type.
• Nominal Dia (mm): 15 to 1000mm 

Additional Information:

• Item Code: EMFM-0608
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Box & Box

Product Details:

Flowtech Make Electromagnetic Water Flow Rate Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm): 15 to 600NB
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/TC END
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• FSD Optional: ±0.5% FSD
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 10 meters
• Installation: Inline Flange Type.

Additional Information:

• Item Code: EMFM-089
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per Month
• Delivery Time: 1 week
• Packaging Details: wooden cages

Product Details:

Product Description

We are leading manufacturer of Low weight Low cost PVC Electromagnetic Flow Meter from India.

Product Specification

 

FLOWTECH Make PVC Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.
 
Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm) : 15 to 100
• Material of Construction : PVC
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 5 kg/cm2
• Process Temperature : Max. 50C
• Flow Tube Material : PVC
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMF-0130
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Piece per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden cage

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.

The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Additional Information:

• Item Code: EMFM-0722
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 weeks
• Packaging Details: Wooden Cages

Product Details:

Product Description

We are leading manufacturer of Low weight Low cost PVC Electromagnetic Flow Meter from India.

Product Specification

 

FLOWTECH Make PVC Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.
 
Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm) : 15 to 100
• Material of Construction : PVC
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 5 kg/cm2
• Process Temperature : Max. 50C
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMF-126
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cage

Product Details:

Flowtech Make Electromagnetic Flowmeter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Specifications:

• Nominal Dia (mm) : 15 to 1000mm
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150 Deg C
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 30 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-063
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 500 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden cages

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Additional Information:

• Item Code: EMFM-0320
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Piece per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Digital Water Flow Meter Applications

Water flow meters can measure cold water, hot water, clean water, dirty water and slurries

Indian Market

Indian States: Telangana, Tamil Nadu, Mizoram, Jharkhand, Arunachal Pradesh, Manipur, Tripura, Kerala, Gujarat, Maharashtra, Madhya Pradesh, Rajasthan, Uttar Pradesh, Orissa, Uttarakhand, Assam, Sikkim, Nagaland, Chhattisgarh, Tamil Nadu, Jammu and Kashmir, Haryana, West Bengal, Goa, Delhi, Bihar, Punjab, etc.

International Market

Asian Countries: Indonesia, Thailand, Malaysia, Singapore, Nepal, Bangladesh, etc
Europe: France, Poland, Spain, etc
Gulf Countries: Saudi Arabia, United Arab Emirates,etc..

Additional Information:

• Item Code: EMFM-024
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Water Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600NB
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• FSD Optional: ±0.5% FSD
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0634
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 piece per Month
• Delivery Time: 2 Weeks
• Packaging Details: Wooden cages

Product Details:

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer TC END
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 10 meters
• Installation: Inline Flange Type.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cage

Product Details:

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Operating Principle:

The electromagnetic flow meter is an instrument for measuring the flow of conductive fluid using Faraday's electromagnetic induction law, and consequently the fluid must be electrically conductive. As illustrated below a magnetic field with density B - perpendicular to the direction of flow - stretches across a fluid flowing within an electrically isolated pipe.

The magnetic flux will induce a voltage difference (E) that can be measured between two electrodes arranged perpendicular to the direction of flow and themagnetic field.The voltage is proportionalto the velocity (V) ofthe fluid. 


(1) E = B x D x V x k [Volt] where E is the voltage that is induced between the two electrodes B is the magnetic flux density D is the distance between the two electrodes V is the fluid velocity k is a dimensionless constant.
The flow of the fluid Q (M³/Sec.) is given by the following formula: (2) Q = π x D2 x V / 4 => V = 4 / (π x D2) where π :is the constant pi (= 22/7) D : is the internaldiameter V :is the fluid velocity The combination of above formulas (1) and (2) gives the following formula E = K x B x D x Q x 4 / (π x D x D) = 4 K x B x Q / (π x D) Evidently the voltage E is proportional to the actual flow.

Measurement: 

Electromagnetic flow meters may have eitherDirect Current(DC) orAlternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due toelectro-chemical polarization between the electrodes and the fluid. The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of bothDC and AC systems.
A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.

Technical Detail:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘C’, & Tantalum
• Nominal Dia (mm) : 15 to 600mm
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/TC END
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 10 meters
• Installation: Inline Flange Type.

Additional Information:

• Item Code: EMFM-0944
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Piece per month
• Delivery Time: 2 week
• Packaging Details: Wooden Cage

Product Details:

Flowtech Make Electromagnetic Flow Boiler Feed Water Meter Are Intended For Measuring Flow Of Electrically Conductive Liquids In Closed Pipe Lines Where The Magnetic Flux Permeates The Entire Cross Sectional Area Of The Liquids Flow. Electromagnetic Flow Meters Measure Electromotive Forces To Determine Liquids Velocity Using Faraday’s Law Of Electromagnetic Induction And Compute The Flow Rate Using Equation Of Conductive Liquids Having Minimum Conductivity Of 5 Micro Siemens / Cm And Are Relatively Immune To The Effects Of Temperature , Pressure , Viscosity & Density Of The Flowing Liquid.

Working Principle:

• This Is Working On The Principal Of Faraday`s Law Which States That When A Conductor Moves Through A Magnetic Field Of A Given Strength A Voltage Is Produced In The Conductor And Proportion To The Relative Velocity Between The Conductor And The Magnetic Field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-360
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 Week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Online Effluent Flow Meter Are Intended For Measuring Flow Of Electrically Conductive Liquids In Closed Pipe Lines Where The Magnetic Flux Permeates The Entire Cross Sectional Area Of The Liquids Flow. Electromagnetic Flow Meters Measure Electromotive Forces To Determine Liquids Velocity Using Faraday’s Law Of Electromagnetic Induction And Compute The Flow Rate Using Equation Of Conductive Liquids Having Minimum Conductivity Of 5 Micro Siemens / Cm And Are Relatively Immune To The Effects Of Temperature , Pressure , Viscosity & Density Of The Flowing Liquid.

Working Principle:

• This Is Working On The Principal Of Faraday`s Law Which States That When A Conductor Moves Through A Magnetic Field Of A Given Strength A Voltage Is Produced In The Conductor And Proportion To The Relative Velocity Between The Conductor And The Magnetic Field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• FSD Optional: ±0.5% FSD
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-109
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 Week
• Packaging Details: Wooden Cages

Product Details:

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.
Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm): 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCDDisplay Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDCOutput : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type..

Additional Information:

• Item Code: EMFM-0712
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Milk Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600NB
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Display : 2 Line Alfa Numeric LCDOutput : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMF-089
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Description:

• Flowtech Make Industrial Flow Meter Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD.
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA / RS 485
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters.
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-1065
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 pieces per month
• Packaging Details: Wooden Box

Product Details:

Flowtech Make Battery Digital Electromagnetic Flow Meter Battery Operated principle is based on measuring electromotive force induced in electrically conductive liquid when it moves in magnetic field. The magnetic field is furnished in the flow sensor's inner channel by a special electromagnetic system.

Inductive electromotive force (EMP) E is proportional to the mean flow velocity v, distance between the electrodes d (which is equal to the sensor's inner diameter), and magnetic field strength E = v ×d×B×k.

Specifications:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 5 kg/cm2
• Process Temperature : Max. 60C
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFMBO-090
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 Week
• Packaging Details: Wooden cages

Product Details:

Flowtech Make Electromagnetic Hot Water Flow Meters are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600NB
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• FSD Optional: ±0.5% FSD
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65.

Additional Information:

• Item Code: EMFM-054
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 piece per Month
• Delivery Time: 1 Week
• Packaging Details: Wooden Box & Box

Product Details:

Flowtech Make Electromagnetic Water Pipe Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm): 15 to 600NB
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• FSD Optional: ±0.5% FSD
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-007
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Description:

• Flowtech Make Electromagnetic

• Digital Water Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.

 

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD.
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA / RS 485
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters.
• Installation : Inline Flange Type

Additional Information:

• Item Code: EMFM-0018
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 piece per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Water Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600NB
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Optional: ±0.5% FSD
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0203
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cages

Product Details:

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity density of the flowing liquid.
 
Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-01234
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 WEEK
• Packaging Details: WOODEN CAGES

Product Details:

Description:

• Flowtech Make Electromagnetic Digital Flow Meter Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘C’, & Tantalum
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
•  Optional: ±0.5% FSD
• Repeatability : 0.3%Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0121
• Port of Dispatch: Vadodara
• Production Capacity: 100 Piece per month
• Delivery Time: 1 weeks
• Packaging Details: Wooden Cages

Product Details:

Description:

• Flowtech Make Electro Magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600NB
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0042
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 2 Weeks
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electro magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0705
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Piece per Month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Electromagnetic Water Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.


Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Specifications:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, Tantalum
• Process Pressure : Max. 5 kg/cm2
• Process Temperature : Max. 150C
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0552
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cage

Product Details:

Flowtech Make Effluent Water Digital Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm): 15 to 600
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD.
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Protection Class for Transmitter: IP 65Cable Length for Remote : 10 meters.Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden cages

Product Details:

Flowtech Make Electromagnetic Magnetic Water Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm): 15 to 600
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Repeatability: 0.3%Display : 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Output: Std. 4 – 20 mA
• Protection Class for Sensor: IP 65Protection Class for Transmitter : IP 65
• Cable Length for Remote: 10 meters
• Installation: Inline Flange Type Magnetic Water Flow Meter.

Additional Information:

• Item Code: EMFM-0154
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: wooden cages

Product Details:

Flowtech Make Sanitary Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 6400
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Repeatability : 0.3% Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0274
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Box

Product Details:

FLOWTECH Make Electromagnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Technical Detail:

• Nominal Dia (mm) : 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0146
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Make Sanitary Magnetic Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm): 15 to 600
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure : Max. 25 kg/cm2
• Process Temperature : Max. 150C
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-153
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 100 pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Box

Product Details:

Working Principle:

• Data Acquisition Software Electromagnetic Flow Meter This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0981
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mumbai
• Production Capacity: 50 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-099
• Port of Dispatch: Vadodara
• Production Capacity: 100 pieces per month
• Delivery Time: 1 week
• Packaging Details: wooden cages

Product Details:

Data Acquisition Software Flow Meter are intended for measuring flow of electrically conductive liquids in closed pipe lines where the magnetic flux permeates the entire cross sectional area of the liquids flow. Electromagnetic flow meters measure electromotive forces to determine liquids velocity using Faraday’s law of electromagnetic induction and compute the flow rate using equation of conductive liquids having minimum conductivity of 5 micro Siemens / cm and are relatively immune to the effects of temperature , pressure , viscosity & density of the flowing liquid.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65
• Protection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0198
• Port of Dispatch: Set
• Production Capacity: 50 pieces per month
• Delivery Time: 1 week
• Packaging Details: wooden cages

Product Details:

Working Principle:

This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Nominal Dia (mm): 15 to 600
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm) : 15 to 400
• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range : 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy : ± 1% FSD Optional: ±0.5% FSD
• Repeatability : 0.3%
• Display : 2 Line Alfa Numeric LCD
• Display Version : Integral /Remote
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA
• Protection Class for Sensor : IP 65P
• rotection Class for Transmitter : IP 65
• Cable Length for Remote : 10 meters
• Installation : Inline Flange Type.

Additional Information:

• Item Code: EMFM-0162
• Port of Dispatch: Piece
• Production Capacity: 100 Pieces per month
• Delivery Time: 1 week
• Packaging Details: wooden cages