Float and Board Type Level Indicator

Our range of products include float type tank level indicator, level gauge and water level indicators, level gauge for liquid use, tank float level indicators, oil tank level indicators and tank liquid level indicator.

Float Type Tank Level Indicator

  • Foil Print

₹ 7200/Piece Get Latest Price

Product Brochure
Fluid TypeLiquid
Measuring RangeMax 30 Meter
BrandFlowtech
ModelFMIPL-FBLI-0119
ApplicationIndustrial
Material GradeSS304
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech Make Heavy Duty Tubular Liquid Level Indicator is a Simple & reliable device for direct Reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & Also endanger human life.

Working Principle:

  • The Gauge is fitted between two end blocks through gland packings The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in gauge. Guards are provided in the form of tie-rods / c - channels around the gauge to protect it from accidental blows. End blocks have built-in-isolating valve, drain valve and vent plug.


Specification:

  • Connection: Flanged ASA 150# / Screwed/ T.C joint
  • End Fitting: CS/S.S.304/S.S 316/P.P/FRP, PTFE Lined
  • Protective Channel: C.S. Rectangle Channel box With Powder Coated/ S.S.304 / S.S 316 /P.P / FRP.
  • Glass Tube: Heavy Walled Borosilicate H-19 / 16 / 25
  • Packing: Teflon
  • Valve: C.S./S.S.304/S.S.316/P.P.
  • Range : 300 to 3000 mm(more than 3000 mm please consult factory)

Level Gauge And Water Level Indicators

₹ 7200/Piece Get Latest Price

Product Brochure
Fluid TypeLiquid
MaterialStainless Steel
BrandFlowtech
ApplicationIndustrial
RangeMax. 30 Meter
Operating temperature80 to 350 degree C
Country of OriginMade in India

Minimum order quantity: 1 Piece

“Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Features:

  • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
  • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
  • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
  • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
  • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


Materials Of Construction:

  • Float : S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
  • Pulley & Pulley Pin : M.S. / S.S.304
  • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate : M.S / S.S.304 / S.S.316
  • Scale Bracket (T) : M.S. / S.S.304
  • Pointer : M.S / S.S.304 with PP Roller for Frictionless
  • Sliding On Board.
  • Available : From 1 Metre to 30 Metre

Level Gauge for Liquid Use

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationIndustrial
MaterialSS
Measuring RangeMax. 30 meters
BrandFlowtech
Operating temperature80 to 200 degree C
Country of OriginMade in India

Minimum order quantity: 1 Piece

“Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Features:

  • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
  • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
  • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
  • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
  • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


Materials Of Construction:

  • Float : S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
  • Pulley & Pulley Pin : M.S. / S.S.304
  • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate : M.S / S.S.304 / S.S.316
  • Scale Bracket (T) : M.S. / S.S.304
  • Pointer : M.S / S.S.304 with PP Roller for Frictionless
  • Sliding On Board.
  • Available : From 1 Metre to 30 Metre

Tank Float Level Indicators

₹ 7290/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
Accuracy-+ 5 mm
BrandFlowtech
ApplicationIndustrial
MaterialMild steel
RangeMax. 30 Meter

Minimum order quantity: 1 Piece

“Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Features:

  • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
  • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
  • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
  • In vapour seal there is no sealing liquids so we get absolute vapour tightness.

 

MATERIALS OF CONSTRUCTION:

 Float : S.S.316 / S.S.304 / Poly Propylene

 Float Wire & Float Guide Wire : S.S.316 / Poly Propylene

 Pulley & Pulley Pin : M.S. / S.S.304

 Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof

 Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.

 Anchor Plate : M.S / S.S.304 / S.S.316

 Scale Bracket (T) : M.S. / S.S.304

 Pointer : M.S / S.S.304 with PP Roller for Frictionless

Sliding On Board.

 

 Available : From 1 Metre to 30 Metre

Oil Tank Level Indicators

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialSS
BrandFlowtech
ModelFBLI-0523
ApplicationIndustrial
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float & Board Type Oil Tank Level Indicators gauge suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.Suitable for tall and overhead tanks of non pressurised and non hazardous Chemical storage tanks.A large self centered float follows the liquid level in this gauge.
  • A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminums powder coated scale.Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Vapors seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.In vapour seal there is no sealing liquids so we get absolute vapour tightness.

Tank Liquid Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
BrandFlowtech
ApplicationIndustrial
MaterialMild steel
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Float devices use the buoyancy of a float to Tank Liquid Level Indicator the liquid level in the tank. The chain is attached to a counterweight which indicates the level as the float moves up and down. These types of devices are often found on atmospheric storage tanks in OEMS, Petroleum & Pharmacy Industry and the specific gravity of the fluid should be more than 0.6 like oil tanks, large Acid tanks and the storage tanks of storage tanks of Oil, Fire / DM water Alkalis, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
Flowtech is the leading manufacturer of float & Board level indicators in India and supplies its products to not just all major states of India but many overseas countries as well. The float we design as per the specific gravity of the liquid, floating on the liquid levels. The float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 meter height of the tank, we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

  • Flowtech float & Board level indicators are available in different materials S.S.304/S.S.316/P.P./Teflon etc.
  • Flowtech offers vapor Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes/vapors OR N2 [Nitrogen] Purging tanks.
  • The float is connected to a magnetized counterweight moving in a sealed S.S. pipe & which drives a follower magnetized bicolor capsule inside a glass tube to indicate liquid level.
  • The pointer of the level indicator moves on a 150 mm width aluminum powder coated scale.
  • Vapors seals (Magnetic) for special applications like HCl, N2 purged tank, dilute alkalis, dilute HNO3, NH3 Methanol, Benzene, Toluene, IPA etc.
  • In vapor seal, there are no sealing liquids so we get absolute vapor tightness.

Performance:
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.Float & Board Type Level Indicator. Suitable for tall and overhead tanks of non pressurised and non hazardous Chemical storage tanks.A large self centered float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminums powder coated scale.Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Vapors seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.In vapour seal there is no sealing liquids so we get absolute vapour tightness.

Water Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
TypeFloat Level Gauge
Fluid TypeWater
Usage/ApplicationLiquid
BrandFlowtech
ModelFMIPL-FBLI-0163
ApplicationIndustrial
MaterialMild steel
Material GradeSS304
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float & Board Type Tank Level gauge Water Level Indicator suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Available From 1 Metre to 30 Meter Flowtech Measuring Instruments Private Limitedthe float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.. Float & Board Type Level Indicator. Suitable for tall and overhead tanks of non pressurised and non hazardous Chemical storage tanks.
  • A large self centered float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminums powder coated scale.Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Vapors seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.In vapour seal there is no sealing liquids so we get absolute vapour tightness.

Float Level Indicators

₹ 7200/Piece Get Latest Price

Product Brochure
TypeFloat & Board Level Gauge
Tank Height10 m
Float Size300 mm
Accuracy (+/-)10mm
MaterialSS
Construction TypeUnguided
BrandFlowtech
ModelFBTLI-0821
ApplicationIndustrial
Measuring RangeMax. 30 Meter
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech Float Level Indicators suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.


Performance:

  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

 

Material Of Construction:

  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at
  • every 10CM and Red Marking at Every Meter.
  • Anchor Plate M.S / S.S.304 / S.S.316
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.

Float Type Tank Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationWater & Liquid
BrandFlowtech
ModelFBLI-0840
ApplicationIndustrial
Available MaterialMS, SS, PP
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Tank Level Indicator Float Type suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge. The float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • "Flowtech" also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dales with the level of fluid this makes the pointer move one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Material Of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304 Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate M.S / S.S.304 / S.S.316
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
  • Available From 1 Meter to 30 Meter

Water Tank Water Level Indicator

₹ 5400/Piece Get Latest Price

Product Brochure
Usage/ApplicationIndustrial
Fluid TypeWater
BrandFlowtech
ModelFBLI-0225
MaterialStainless Steel
Country of OriginMade in India

Minimum order quantity: 1 Piece

“Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, floatroof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be morethan 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unitconsist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are thosewhich come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonettedparts are the one which do not come in contact with the liquid e.g. Float wire,Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is availablein different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is designas per the specific gravity of the liquid, floating on the liquid levels. This float connected to apointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide twoguide wires firmly anchored to the tank bottom. So that horizontal movement of the float isrestricted.

Materials Of Construction:

  • Float : S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
  • Pulley & Pulley Pin : M.S. / S.S.304
  • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weatherProof Enclosure of Weather Proof
  • Board (Scale) : Aluminium with Powder Coated having 150mm Width & White Back Ground & Blackwriting at every 10CM and Red Marking atEvery Meter.
  • Anchor Plate : M.S / S.S.304 / S.S.316
  • Scale Bracket (T) : M.S. / S.S.304
  • Pointer : M.S / S.S.304 with PP Roller for FrictionlessSliding On Board.
  • Available : From 1 Metre to 30 Metre

Water Tank Level Indicators

₹ 5400/Piece Get Latest Price

Product Brochure
Usage/ApplicationWater & Liquid
BrandFlowtech
MaterialStainless Steel
ApplicationIndustrial
RangeMax. 30 Meter
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float & Board Type Water Tank Level Indicators gauge suitable for large non - pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two type of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which comes in contact with the liquid e.g. Float anchor plan float guide wire etc while. Non-wetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakers indicator pulley, pulley hosing scale, indicator etc.

The Float is available in different material S.S.304/S.S.316/P.P./ Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Features:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and deals with the level of fluid this makes the pointer move on the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Salient Features:

  • Simple,low cost and reliable level gauge.
  • Wetted parts available in SS304 / SS316 / PP.
  • Suitable for installation on "tank in service".
  • Indicator rolls on the gauge board with the help of PVC Rollers.
  • Can be used for the applications with volatile liquid or inert gas blanketing by using liquid seal assembly.
  • Large numerals visible from a distance easily reable from a distance.
  • Simple installation and commissioning.
  • No maintenance required.

Materials of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate M.S / S.S.304 / S.S.316
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
  • Available From 1 Metre to 30 Metre.

Float and Board Level Indicator

₹ 7290/Piece Get Latest Price

Product Brochure
MaterialSS
BrandFlowtech
ModelFBLG-066
ApplicationIndustrial
Float Wire MaterialSS316
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float And Board Level Indicator Type Tank Level gauge (indicator) suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.Suitable for tall and overhead tanks of non pressurised and non hazardous Chemical storage tanks.A large self centered float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminums powder coated scale.Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc. Vapors seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.In vapour seal there is no sealing liquids so we get absolute vapour tightness.

Float and Board Liquid Level Indicator

  • Foil Print

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialSS
BrandFlowtech
ApplicationIndustrial
Material GradeSS304
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float and Board Liquid Level Indicator suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance: 
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Material Of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing atevery 10CM and Red Marking at Every Meter.
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
  • Available From 1 Metre to 30 Meter.

Float Board Level Indicator

₹ 7290/Piece Get Latest Price

Product Brochure
MaterialSS
Fluid TypeLiquid
BrandFlowtech
ModelFBLI-0913
ApplicationIndustrial
Material GradeSS304
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float Board Level Indicator Tank Level gauge (indicator) suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Material Of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing atevery 10CM and Red Marking at Every Meter.
  • Anchor Plate M.S / S.S.304 / S.S.316
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.

Float Type Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationWater
BrandFlowtech
End FittingFlange
MaterialStainless Steel
Display TypeAnalog
ApplicationIndustrial
WidthMax. 300 mm
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float & Board Type Tank Level gauge Float Type Level Indicator suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.. Float & Board Type Level Indicator.Suitable for tall and overhead tanks of non pressurised and non hazardous Chemical storage tanks.
  • A large self centered float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.Vapors seals (Magnetic) for special applications like HCl,N2 purged tank, diluted alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.In vapour seal there is no sealing liquids so we get absolute vapour tightness.

Materials Of Construction:
  • Float : S.S.316 / S.S.304 / Poly Propylene Float Wire & Float Guide Wire : S.S.316 / Poly Propylene Pulley & Pulley Pin : M.S. / S.S.304 Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof Board (Scale) : Aluminium with Powder Coated having 150mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter. Anchor Plate : M.S / S.S.304 / S.S.316 Scale Bracket (T) : M.S. / S.S.304 Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding On Board. Available : From 1 Metre to 30 Metre

Tank Level Indicator

₹ 5400/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialStainless Steel
BrandFlowtech
ModelF_BLG-014
ApplicationIndustrial
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Features:

  • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
  • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
  • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
  • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
  • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


Materials Of Construction:

  • Float : S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
  • Pulley & Pulley Pin : M.S. / S.S.304
  • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate : M.S / S.S.304 / S.S.316
  • Scale Bracket (T) : M.S. / S.S.304
  • Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
  • Available : From 1 Metre to 30 Metre

Fuel Tank Level Indicators

₹ 7290/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialSS
BrandFlowtech
ModelFMIPL-FBLG-0211
ApplicationIndustrial
Material GradeSS304
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Fuel Tank Level Indicators suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge. The float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dales with the level of fluid this makes the pointer move one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Material Of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Pointer M.S / SS.304 with PP Roller for Frictionless Sliding On Board.

Float Tank Level Indicator

₹ 7290/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialSS
BrandFlowtech
ModelFMIPL-FBTLI-07
ApplicationIndustrial
RangeMax. 30 Meter
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float Tank Level Indicator Float suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge. The float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Feature:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and dales with the level of fluid this makes the pointer move one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Material Of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate M.S / S.S.304 / S.S.316
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.

Water Level Indicator

₹ 5400/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
BrandFlowtech
ModelFBLI-0178
ApplicationIndustrial
MaterialMild steel
Pressure Max6 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

“Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Features:

  • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
  • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
  • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
  • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
  • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


Materials Of Construction:

  • Float : S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
  • Pulley & Pulley Pin : M.S. / S.S.304
  • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Anchor Plate : M.S / S.S.304 / S.S.316
  • Scale Bracket (T) : M.S. / S.S.304
  • Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
  • Available : From 1 Metre to 30 Metre

Fuel Oil Tank Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
Usage/ApplicationLiquid
MaterialStainless Steel
BrandFlowtech
ApplicationIndustrial
RangeMax. 30 Meter
Material GradeSS316
Country of OriginMade in India

Minimum order quantity: 1 Piece

Flowtech offer Float & Board Type Tank Level gauge Fuel Oil Tank Level Indicator suitable for large non - pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two type of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which comes in contact with the liquid e.g. Float anchor plan float guide wire etc while. Non-wetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakers indicator pulley, pulley hosing scale, indicator etc.

The Float is available in different material S.S.304/S.S.316/P.P./ Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 5 meter height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Design Features:

  • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

Performance:
  • Float Inside the tank raises and deals with the level of fluid this makes the pointer move on the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

Salient Features:
  • Simple,low cost and reliable level gauge.
  • Wetted parts available in SS304 / SS316 / PP.
  • Suitable for installation on "tank in service".
  • Indicator rolls on the gauge board with the help of PVC Rollers.
  • Can be used for the applications with volatile liquid or inert gas blanketing by using liquid seal assembly.
  • Large numerals visible from a distance easily reable from a distance.
  • Simple installation and commissioning.
  • No maintenance required.

Materials of Construction:
  • Float S.S.316 / S.S.304 / Poly Propylene
  • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
  • Pulley & Pulley Pin M.S. / S.S.304
  • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
  • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
  • Scale Bracket (T) M.S. / S.S.304
  • Pointer M.S / S.S.304 with PP Roller for Friction less Sliding On Board.

Board Level Indicator

₹ 7200/Piece Get Latest Price

Product Brochure
Model Name/NumberF&BLI
Usage/ApplicationLiquid
TypeMechanical
MaterialStainless Steel
BrandFlowtech
ApplicationIndustrial
Pressure Max5 kg/cm 2
Country of OriginMade in India

Minimum order quantity: 1 Piece

Product Description :

Float & Board Type Tank Level Gauge (indicator) is suitable for large non – pressurized liquid storagetanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc.This level gauge works on the principle of buoyancy.The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float Anchor Plate, Float Guide Wire etc while. Nonwettedparts are the one which do not come in contact with the liquid e.g. Float Wire, Mounting Brackets, Indicator, Pulley, Pulley Hosing, Scale, indicator etc. In this level gauge, the float is designedas per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, the pointer slides over a CM marked Board, Installed Parallel to thetank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

Material of Construction:

Float : : S.S.316 / S.S.304 / Poly Propylene / SS with PTFE Coated
Float Wire & Float Guide Wire : S.S.316 / Poly Propylene / SS with PTFE Coated.
Pulley & Pulley Pin : S.S.304 / PP
Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast Weather Proof Enclosure / Polypropylene.
Board (Scale) : Aluminium / FRP / SS with Powder Coated having 150 mm Width & White Back Ground & Black writing every 10CM and Red Marking at every Meter.
Anchor Plate : M.S / S.S.304 / S.S.316 / PP
Scale Bracket (T) : M.S. / S.S.304
Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding on Board.
Available : From 1 Metre to 30 Meter.

    Fuel Tank Level Indicators

    ₹ 7200/Piece Get Latest Price

    Product Brochure
    Model Name/NumberF&BLI
    Usage/ApplicationLiquid
    TypeMechanical
    MaterialMS, SS
    BrandFlowtech
    ApplicationIndustrial
    RangeMax. 30 Meter
    Available MaterialSS , MS , P.P. FRP
    Country of OriginMade in India

    Minimum order quantity: 1 Piece

    Product Description :

    Float & Board Type Tank Level Gauge (indicator) is suitable for large non – pressurized liquid storagetanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc.This level gauge works on the principle of buoyancy.The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float Anchor Plate, Float Guide Wire etc while. Nonwettedparts are the one which do not come in contact with the liquid e.g. Float Wire, Mounting Brackets, Indicator, Pulley, Pulley Hosing, Scale, indicator etc. In this level gauge, the float is designedas per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, the pointer slides over a CM marked Board, Installed Parallel to thetank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

    Material of Construction:

    Float : : S.S.316 / S.S.304 / Poly Propylene / SS with PTFE Coated
    Float Wire & Float Guide Wire : S.S.316 / Poly Propylene / SS with PTFE Coated.
    Pulley & Pulley Pin : S.S.304 / PP
    Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast Weather Proof Enclosure / Polypropylene.
    Board (Scale) : Aluminium / FRP / SS with Powder Coated having 150 mm Width & White Back Ground & Black writing every 10CM and Red Marking at every Meter.
    Anchor Plate : M.S / S.S.304 / S.S.316 / PP
    Scale Bracket (T) : M.S. / S.S.304
    Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding on Board.
    Available : From 1 Metre to 30 Meter.

      Fluid Level Indicators

      ₹ 5400/Piece Get Latest Price

      Product Brochure
      Usage/ApplicationLiquid
      BrandFlowtech
      ModelFBLI-918
      ApplicationIndustrial
      RangeMax. 30 Meter
      Country of OriginMade in India

      Minimum order quantity: 1 Piece

      Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

      Features:

      • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
      • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
      • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
      • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
      • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


      Materials Of Construction:

      • Float : S.S.316 / S.S.304 / Poly Propylene
      • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
      • Pulley & Pulley Pin : M.S. / S.S.304
      • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
      • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
      • Anchor Plate : M.S / S.S.304 / S.S.316
      • Scale Bracket (T) : M.S. / S.S.304
      • Pointer : M.S / S.S.304 with PP Roller for Frictionless
      • Sliding On Board.
      • Available : From 1 Metre to 30 Metre

      Board Type Level Indicator

      • Foil Print

      ₹ 5400/Piece Get Latest Price

      Product Brochure
      Usage/ApplicationLiquid
      BrandFlowtech
      ApplicationIndustrial
      Pressure Max5 kg/cm 2
      Temperature Max200 Degree C
      Available MaterialSS , MS , P.P. FRP
      Country of OriginMade in India

      Minimum order quantity: 1 Piece

      “Flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, float roof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be more than 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unit consist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are those which come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonetted parts are the one which do not come in contact with the liquid e.g. Float wire, Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is available in different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

      Features:

      • A large self centred float follows the liquid level in this gauge. A rope fitted with a float moves over a pair of dust free pulleys. Level is indicated by a pointer which moves on a 150 mm width aluminium powder coated scale.
      • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils, Lube Oil, Vegetable Oil, Molasses, Glucose etc.
      • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, diluted
      • alkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc. 
      • In vapour seal there is no sealing liquids so we get absolute vapour tightness.


      Materials Of Construction:

      • Float : S.S.316 / S.S.304 / Poly Propylene
      • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
      • Pulley & Pulley Pin : M.S. / S.S.304
      • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
      • Board (Scale) : Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing at every 10CM and Red Marking at Every Meter.
      • Anchor Plate : M.S / S.S.304 / S.S.316
      • Scale Bracket (T) : M.S. / S.S.304
      • Pointer : M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.
      • Available : From 1 Metre to 30 Metre

      Level Indicator

      ₹ 5400/Piece Get Latest Price

      Product Brochure
      Model Name/NumberFBLG-0112
      Usage/ApplicationIndustrial
      BrandFlowtech
      RangeMax. 30 Meter
      Available MaterialSS, MS & PP
      Country of OriginMade in India

      Minimum order quantity: 1 Piece

      Flowtech offer Float & Board Type Tank Level gauge Level Indicator suitable for large non - pressurized liquid storage tanks / vessels. The Specific Gravity of the fluid should be more than 0.6. Float is available in different material S.S.304/S.S.316/P.P./Teflon etc. In this level gauge,the float is design as per the specific gravity of the liquid, floating on the liquid levels. This float connected to a pointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board, Installed Parallel to the tank. For more than 3 metre height of the tank we provide two guide wires firmly anchored to the tank bottom. So that horizontal movement of the float is restricted.

      Design Feature: 

      • Flowtech also offers vapour Seal Type float & Board type level Gauge which is generally used for tanks having corrosive fumes / vapours OR N2 [Nitrogen] Purging tanks. In this level gauge the float is connected to a magnetized counter weight moving in a sealed S.S. pipe & which drives a follower magnetized bi - colour capsule inside a glass tube to indicate liquid level.

      Performance: 
      • Float Inside the tank raises and dails with the level of fluid this makes the pointer mobe one the scale indicating level inside the tank. In this level gauge, when tank is full the pointer is at bottom position on board and when tank is empty, the pointer will be at top position.

      Material Of Construction: 
      • Float S.S.316 / S.S.304 / Poly Propylene
      • Float Wire & Float Guide Wire S.S.316 / Poly Propylene
      • Pulley & Pulley Pin M.S. / S.S.304
      • Pulley Housing Aluminium / S.S.304 / S.S.316 die Cast weather Proof Enclosure of Weather Proof
      • Board (Scale) Aluminium with Powder Coated having 150 mm Width & White Back Ground & Black writing atevery 10CM and Red Marking at Every Meter.
      • Anchor Plate M.S / S.S.304 / S.S.316
      • Scale Bracket (T) M.S. / S.S.304Pointer M.S / S.S.304 with PP Roller for Frictionless Sliding On Board.

      Liquid Level Indicator

      ₹ 5400/Set Get Latest Price

      Product Brochure
      Usage/ApplicationIndustrial
      Packaging TypeWooden Cages
      TypeMechanical
      BrandFlowtech
      Measuring RangeMax. 36 Meter
      Available MaterialSS, MS, P.P.
      Country of OriginMade in India

      Minimum order quantity: 1 Set

      “flowtech” offer Float & Board Type Tank Level gauge (indicator) suitable for large non –pressurized liquid storage tanks / vessels. This gauge is also applicable to cone roof, floatroof, floating roof, under grand tanks etc. The Specific Gravity of the fluid should be morethan 0.6(Free Flow) This level gauge wonks on the principle of buoyancy. The whole unitconsist of two types of parts. Viz wetted parts & Non-wetted parts. Wetted parts are thosewhich come in contact with the liquid e.g. Float anchor plan float guide wire etc while. Nonettedparts are the one which do not come in contact with the liquid e.g. Float wire,Mountain Breakets indicator pulley pulley hosing scale, indicator etc. The Float is availablein different material S.S.304 / S.S.316/P.P./Teflon etc. In this level gauge, the float is designas per the specific gravity of the liquid, floating on the liquid levels. This float connected to apointer through Rope via a Sets of Pulleys, The pointer slides over a CM marked Board,Installed Parallel to the tank. For more than 5 metre height of the tank we provide twoguide wires firmly anchored to the tank bottom. So that horizontal movement of the float isrestricted.

      Features:

      • A large self centred float follows the liquid level in this gauge. A rope fitted with afloat moves over a pair of dust free pulleys. Level is indicated by a pointer whichmoves on a 150 mm width aluminium powder coated scale.
      • Mainly used for storage tanks of Oil, Fire / DM water Alkalies, Acids furnace Oils,Lube Oil, Vegetable Oil, Molasses, Glucose etc.
      • Vapours seals (Magnetic) for special applications like HCl,N2 purged tank, dilutedalkalies, dilute HNO3,NH3 Methanol,Banzene,Toluene, IPA etc.
      • In vapour seal there is no sealing liquids so we get absolute vapour tightness.

      Materials Of Construction:
      • Float : S.S.316 / S.S.304 / Poly Propylene
      • Float Wire & Float Guide Wire : S.S.316 / Poly Propylene
      • Pulley & Pulley Pin : M.S. / S.S.304
      • Pulley Housing : Aluminium / S.S.304 / S.S.316 die Cast weatherProof Enclosure of Weather Proof
      • Board (Scale) : Aluminium with Powder Coated having 150mm Width & White Back Ground & Blackwriting at every 10CM and Red Marking atEvery Meter.
      • Anchor Plate : M.S / S.S.304 / S.S.316
      • Scale Bracket (T) : M.S. / S.S.304
      • Pointer : M.S / S.S.304 with PP Roller for FrictionlessSliding On Board.
      • Available : From 1 Metre to 30 Metre

      X

      Contact Us

      Nilesh Shah (Director)
      Flowtech Measuring Instruments Private Limited
      No. 900, 2 B, G I D C, Makarpura
      Vadodara - 390010, Gujarat, India

      Get Directions
      Send Email
      Share:
      Thank youYour Enquiry has been sent successfully.