Flow Meter

Product Details:

Flowtech Make Electromagnetic Water Digital Flow Meter Are Intended For Measuring Flow Of Electrically Conductive Liquids In Closed Pipe Lines Where The Magnetic Flux Permeates The Entire Cross Sectional Area Of The Liquids Flow. Electromagnetic Flow Meters Measure Electromotive Forces To Determine Liquids Velocity Using Faraday’s Law Of Electromagnetic Induction And Compute The Flow Rate Using Equation Of Conductive Liquids Having Minimum Conductivity Of 5 Micro Siemens / Cm And Are Relatively Immune To The Effects Of Temperature , Pressure , Viscosity & Density Of The Flowing Liquid.

Working Principle:

• This Is Working On The Principal Of Faraday`s Law Which States That When A Conductor Moves Through A Magnetic Field Of A Given Strength A Voltage Is Produced In The Conductor And Proportion To The Relative Velocity Between The Conductor And The Magnetic Field.

Technical Detail:

• Material of Construction : MS, SS 304, SS 316 & SS 316L
• Electrode Material : SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Flow Tube Material : SS 316
• End Connection : Flange/Wafer/TC END
• Flange- Standard : ANSI B 16.5 150 #RF / 300 # RF
• Display Unit : Standard Unit in M3, Litre
• Power Supply : 230 VAC, 110 VAC & 24 VDC
• Output : Std. 4 – 20 mA

Additional Information:

• Item Code: FMIPL-EMFM
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 150 Pieces per month
• Delivery Time: 1 week
• Packaging Details: Wooden Cages

Product Details:

Flowtech Liquid sensors are intended for general in line metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Acrylic Body metering tubes. These are the principle of Variable Area.The float moves freely up and down tapered Acrylic body Tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Design Features:

• Suitable for Water, Saline Water, Air N2 H2 and Natural Gases
• Adjustable Low & High Flow , switch
• Acrylic Block Body Imported Transparent Solid
• Flanged, TC joint, BSP (M), BSP (F) Connection
• Available from ¼” NB to 150 NB
• pipe size and ranges between 30 to 80,000 LPH of Water at ambient temperature

“Flowtech” Acrylic Body Tube Variable Area Flow Meters (Rotameters) are intended for general in line metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Acrylic Body metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered Acrylic body Tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross sectional area of the float.Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication. Based on Bemoulli's theorem, the principle mentioned above can be theoretically expressed as follows.

Material Of Construction:

• Tube : Solid Acrylic Block
• Float : SS 316, PTFE, Aluminium, P.P, others on request
• Packing : Neoprene, PTFE, Silicon, Viton
• End Fitting : M.S., C.S., SS304, SS316, CF-8M, CF8, PVC, others on request.

Additional Information:

• Item Code: FMIPL-ABR-052
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: VADODARA
• Production Capacity: 1000 Pieces per month
• Delivery Time: 2 weeks
• Packaging Details: Wooden Cage & As Per Customer Requirements

Product Details:

Flowtech's Thermal Dispersion Mass Flow meters are accurate, easy to install, have no moving parts, and best suitable solution for measuring compressed air, oxygen, nitrogen, natural gas, LPG gas, propane, and most common gases. It can measure mass flow and volumetric flow of gas along with maximum gas velocity up to 100 nm/s without the need for additional pressure and temperature compensation. 

The thermal flow sensor is designed to meet the industrial norms and also provide an online monitoring solution which is an easy and effective way to manage and improve your operations plant. Each thermal mass flow meter is individually calibrated at the factory using the international standard for calibration. Flowtech Measuring Instruments Pvt Ltd is the manufacturer, supplier and distributor of the thermal mass flow meter.

Additional Information:

• Item Code: DTFM-01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Vadodara
• Production Capacity: 100 Set per month
• Delivery Time: 2 week
• Packaging Details: Wooden Cages