Flowtech Measuring Instrument Private Limited

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / Hose Nipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Flowtech Glass Tube Flow Meters Rotameters are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Simplified piping and reduced space requirement.Permanent magnetic link between metering float and motion position transmitter. Precision swaged metering tube.Heavy duty welded float and guide construction. Guide cartridges easily removable for cleaning. Provide with Electrical transmitter, flow indicator OR alarm.

Specification:

• Scale length: 180 degree Angular
• Pressure Ratings: 40 Bar
• Temperature Ratings: - 20º C to 250º C
• Connections: Flanged OR Screwed
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al
• SS End Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases
• Available in C.S, SS-304, SS-316 Poly Propelene.P.T.F.E. Lined. Flanged, Screwed or Hose connections. Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature. Linear scale having accuracy of 2% FSD.High & Low flow switches.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Flowtech Water Treatment Rotameter are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Product details:

• Simplified piping and reduced space requirements.
• Permanent magnetic link between metering float and motion position transmitter.
• Precision swaged metering tube.
• Heavy duty welded float and guide construction.
• Guide cartridges easily removable for cleaning
• Provide with Electrical transmitter, flow indicator OR alarm.
• Rangeability : 10:1Pressure Ratings : 40 Bar
• Temperature Ratings : 20º C to 250º C
• Connections : Flanged OR Screwed
• Tube : 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float : 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box : ABS, Cast Al.
• SS End Fitting : 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Available in C.S, SS-304, SS-316 Polypropylene.P.T.F.E. Lined.
• Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature.Linear scale having accuracy of 2% FSD.High & Low flow switches.

Flowtech Gas Flow Rotameter from our side is a widely known product. These type of rota meters from our side are suitable for metering of translucent and opaque fluids under high operating pressure and temperature. Sourced from well reputed manufacturers of industry, these are widely acknowledged for their dimensional preciseness, accurate results and compactness.

Features:

• Dimensional accuracy
• Precise results
• Wide temperature and pressure range

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Pressure Ratings: 40 Bar
• Repeatability: 0.5%
• Rangebility: 10:1
• Scale length: 180 degree Angular
• Pressure Ratings: 40 Bar
• Temperature Ratings: 20º C to 250º C
• Connections: Flanged OR Screwed
• Enclosure: IP 55 OR IP 65 on request
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al
• SS End Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases Available in C.S, SS-304, SS-316 Poly Propelene.P.T.F.E. Lined Flanged, Screwed or Hose connections Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area.
The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation : 

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area of the float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure. 

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details : 

Material of Construction : 

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 120º C for Gasservices and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / Hose Nipple.
Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.

FLOWTECH make Water Treatment Rotameter are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.Simplified piping and reduced space requirements.Permanent magnetic link between metering float and motion position transmitter.Precision swaged metering tube.Heavy duty welded float and guide construction.Guide cartridges easily removable for cleaningProvide with Electrical transmitter, flow indicator OR alarm.

Product details:

• Accuracy: /- 2% F.S.D
• Repeatability: 0.5%
• Temperature Ratings: - 20º C to 250º C
• Connections: Flanged OR Screwed
• Enclosure: IP 55 OR IP 65 on request
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al
• SS End Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases. Available in C.S, SS-304, SS-316 Poly Propelene.P.T.F.E. Lined. Flanged, Screwed or Hose connections. Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature. Linear scale having accuracy of 2% FSD.High & Low flow switches.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined. 

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Flowtech Flow Meter Rotameters are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Product details:

• Simplified piping and reduced space requirements
• Permanent magnetic link between metering float and motion position transmitter
• Precision swaged metering tube
• Heavy duty welded float and guide construction
• Guide cartridges easily removable for cleaningProvide with Electrical transmitter, flow indicator OR alarm.

Specification:

• Accuracy: /- 2% F.S.D.
• Repeatability: 0.5%
• Temperature Ratings: 20º C to 250º C
• Connections: Flanged OR Screwed
• Enclosure: IP 55 OR IP 65 on request
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al
• SS End Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases. Available in C.S, SS-304, SS-316 Polypropylene.P.T.F.E. Lined. Flanged, Screwed or Hose connections. Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature. Linear scale having accuracy of 2% FSD.High & Low flow switches.

Flowtech Glass Tube Type Rotameter are intended for general in line and By-Pass metering applications (i.e. for Gas Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.

Product details:

• Simplified piping and reduced space requirements.
• Permanent magnetic link between metering float and motion position transmitter.
• Precision swaged metering tube.
• Heavy duty welded float and guide construction.
• Guide cartridges easily removable for cleaning.
• Provide with Electrical transmitter, flow indicator OR alarm.

Specification:

• Accuracy: /- 2% F.S.D
• Repeatability: 0.5%
• Rangeability: 10:1
• Scale length: 180 degree Angular
• Pressure Ratings: 40 Bar
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al
• SS End Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases
• Available in C.S, SS-304, SS-316 Polypropylene.P.T.F.E. Lined. Flanged, Screwed or Hose connections. Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature. Linear scale having accuracy of 2% FSD.High Low flow switches.

Product Description :

Flowtech Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in line and By Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate

Principal of Operation :

When fluid or gas flows through a taper tube containing a float, a pressure difference of P1 and P2 is created between upper and lower side of the float. The float moves upwards by a force obtained by multiplying the pressure differential by the maximum cross-sectional area ofthe float.

Due to taper tube, as the float moves upwards, the fluid passing area increases as a result of which the differential pressure decreases. Upward movement of float stops when the dead load is dynamically balanced by the differential pressure.

Tapering of metering tube is so designed that the vertical movement of the float becomes linearly proportional to the rate of flow and the scale is provided to read the position of the float, thus giving birth to flow rate indication.

Technical Details :

Accuracy : ± 2% F.S.D.
Temperature Ratings : Maximum Operating Temperature rating is 150º C for Gas Services and 93º C for Liquid services.
Repeatability : 0.5 %
Connections : Flanged / Screwed / Tri Clover Joint / HoseNipple. Rangeability : 10:1
Enclosure : IP 55
Scale length : 180-200 mm.  
Flow Range : 50 LPH to 30000 LPH

Material of Construction :

Tube : Borosilicate Glass
Float : SS 316 / PTFE / Aluminum / P.P.
Pickings : Neoprene, PTFE, Silicon, Viton
Frame & Cover : M.S. / SS End Fitting : M.S. / C.S. / SS304 / SS316 / MS with PTFE Lined / SS PTFE Lined
Body & Cover : M.S. / SS / MS with FRP Lined.

Flowtech Glass Tube Variable Area Flow Meters Rotameters Flow Measuring Instrument are intended for general in line and By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. These are the principle of Variable Area. The float moves freely up and down tapered borosilicate glass with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate.

Other Detail:

• The Vertical position of the float as indicated by scale is the measure of the instantaneous flow rate.
• Simplified piping and reduced space requirements.
• Permanent magnetic link between metering float and motion position transmitter.
• Precision swaged metering tube.
• Heavy duty welded float and guide construction.
• Guide cartridges easily removable for cleaning
• Provide with Electrical transmitter, flow indicator OR alarm.

Specification:

• Accuracy: /- 2% F.S.D.Pressure
• Ratings: 40 Bar
• Temperature Ratings: - 20º C to 250º C
• Connections: Flanged OR Screwed
• Tube: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Float: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Indicator Box: ABS, Cast Al.
• SSEnd Fitting: 316SS, 316LSS, 304SS, Hastelloy ‘C”, Titanium
• Mainly used for measuring rated flow of liquid and gases.
• Available in C.S, SS-304, SS-316 Poly Propelene.P.T.F.E. Lined.Flanged, Screwed or Hose connections.Available from 15 NB to 100 NB pipe size and ranges between 30 to 20,000 LPH of water at ambient temperature.Linear scale having accuracy of 2% FSD.High & Low flow switches.