Flowtech Measuring Instruments Private Limited
Vadodara, Gujarat
GST No. 24AABCF8314J1ZQ
TrustSEAL Verified
Call 0804826540585% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Reflex Level Gauge |
| Fluid Type | Liquid |
| Centre Distance | 400 mm |
| Pressure Type | Low Pressure |
| Drain Connection | Needle Valve |
| Vent Connection | Needle Valve |
| Usage/Application | Liquid |
| Model Name/Number | FMIPL-RLG.108 |
| Material | MS |
| Measuring Range | 300MM TO 500MM |
| Model | RLG-0193 |
| Application | Industrial |
| Glass Material | Borosilicate |
| Scale Plate | Centimeter (cm) |
| Gauge Valve | Arm Lever |
| Mounting Orientation | Side |
| Gasket | SS with Graphite |
| Process Connection | Flanged |
| Scale Marking | Centimeter (cm) |
| Scale Material | Stainless Steel |
| Operating Pressure | 0-70 Kg/cm2 |
| Operating Temperature | 0-400 DegreeC |
| Brand | Flowtech |
| Accuracy | - 2% F.S.D |
| Temperature Ratings | - 20 Deg C to 250 Deg C |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Flowtech |
| Flange Standard | 20 NB ASA 300 # RF |
| Measuring Range | Max. 400 mm |
| Fluid Type | Water |
| Flange Size | 20 NB ASA 300 # RF |
| Process Connection | Flanged |
| Chamber MOC | MS |
| Application | Industrial |
| Center to Center distance | 400mm |
| Nut and Bolt | MS, SS |
| Transmitter Signal | NA |
| Material | Cast Steel |
| Centre Distance | 400 mm |
| Pressure Type | High Pressure |
| Gasket | Graphoil |
| Model | RLG-108 |
| Drain Connection | Needle Valve |
| Glass Material | Borosilicate |
| Scale Plate | Centimeter (cm) |
| Type | Reflex Level Gauge |
| Vent Connection | Needle Valve |
| Country of Orgin | India |
| Repeatability | 0.5 % |
| Max. Temperature | 400 Deg C |
| Max. Test Pressure | 65 Kg/cm |
Flowtech Instrument offers IBR Water Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems
Description Of Transparent Type Level Gauge-In this type of level gauge the liquid level is discriminated in the form of different. It is designed for safe and positive visual indication of liquid level in vessels under high pressure & temperature??conditions. It is a flat glass gauge, which has precision moulded prismatic grooves cut on its inner side, which comes in contact with the medium. Light striking the glass covered by liquid is refracted (absorbed) into the liquid??making this portion appear black, whereas light covering the vapour space is reflected back towards the??viewer, making it appear silvery-white. Thus, a sharp clear line marks the liquid level. Construction & Operation Reflex (Fig.1) The liquid chamber (1) is formed by one piece metal body (2), reflex gauge glass (3), sealing gasket (4), cushion {5}and cover plate (6) all held together by u-bolts & nuts (7). The gauge glass sandwitched between the gasket & cushion is placed on front side for viewing of liquid level & held in the recesses machined in the body and cover plate. This ensures leak proof assembly, prevents gasket / cushion slippages and avoids glass to metal contact. The glass section comes in lengths from 11 5mm to 340mm and as many as 5 can be fitted in a single gauge assembly. Extended ranges can be provided by coupling two gauge assemblies through a coupler or the level gauges can be installed in a staggered manner. The level gauge is usually provided with shut - off valves at either ends to isolate the gauge in the event of glass breakage or replacement. Transparent (Fig. 2) The construction is similar to Reflex except that the liquid chamber (01) is formed by one piece metal body and a pair of transparent gauge glass plates.
Gauge Classification Standard Chamber,Large Chamber or Weld Pad.Gauge Glass Tempered borosilicate (Imported)in 30mm width as standard.Cushion CAF Gasket CAF,PTFE Body (Liquid Chamber) MS, CS (EN -8), ASTM A-105, SS304, SS316 or PPCover Plate MS, CS ( EN-8), ASTM A-105, SS304, SS316 or PP Bolts! Nuts MS or Graded Alloy Steel for high temperature service CC Distance 300, 320, 400, 450, 500 MM Gauge Connection Straight Through / Hook -Up Process Connection (PC) Flanged to BS, ASA, ANSI, DIN J Screwed to BS or NPT Orientation of PC Top \ Bottom Left, Right .Rear, Vertical isolating valves Integral Offset Needle Valve / Inline Ball / Globe Valve.Vent Plug Drain Needle / Valve Calibrated Scale (Optional) AI / SS linearly calibrated for level values in mm(LC=10mm)
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Reflex Level Gauge |
| Fluid Type | Water |
| Centre Distance | 400 mm |
| Pressure Type | High Pressure |
| Drain Connection | Needle Valve |
| Vent Connection | Needle Valve |
| Usage/Application | used for the Measurement of liquid level at a glance in tank |
| Model | FMIPL-RLG-456 |
| Brand | Flowtech |
| Material | MS |
| Gasket | CAF |
| Process Connection | Flanged |
| Operating Pressure | 0-65 Kg/cm |
| Operating Temperature | 0-400 Degree C. |
| End Connection | Flange / BSP |
| Flange Standard | ANSI B 16.5 150 #RF / 300 # RF |
| Measuring Range | 300mm,350mm,400mm,500mm |
Description
FLOWTECH Instrument offers IBR Reflex Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.??
Description Of Transparent Type Level Gauge-In this type of level gauge the liquid level is discriminated in the form of different.
It is designed for safe and positive visual indication of liquid level in vessels under high pressure & temperature conditions. It is a flat glass gauge, which has precision moulded prismatic grooves cut on its inner side, which comes in contact with the medium. Light striking the glass covered by liquid is refracted (absorbed) into the liquid making this portion appear black, whereas light covering the vapour space is reflected back towards the viewer, making it appear silvery-white. Thus, a sharp clear line marks the liquid level.
Construction & Operation
Reflex (Fig.1) The liquid chamber (1) is formed by one piece metal body (2), reflex gauge glass (3), sealing gasket (4), cushion {5}and cover plate (6) all held together by u-bolts & nuts (7). The gauge glass sandwitched between the gasket & cushion is placed on front side for viewing of liquid level & held in the recesses machined in the body and cover plate. This ensures leak proof assembly, prevents gasket / cushion slippages and avoids glass to metal contact. The glass section comes in lengths from 11 5mm to 340mm and as many as 5 can be fitted in a single gauge assembly. Extended ranges can be provided by coupling two gauge assemblies through a coupler or the level gauges can be installed in a staggered manner. The level gauge is usually provided with shut - off valves at either ends to isolate the gauge in the event of glass breakage or replacement.
Transparent (Fig. 2) The construction is similar to Reflex except that the liquid chamber (01) is formed by one piece metal body and a pair of transparent gauge glass plates.
Specifications
Gauge Classification Standard Chamber,Large Chamber or Weld Pad.Gauge Glass Tempered borosilicate (Imported)in 30mm width as standard.Cushion CAFGasket CAF,PTFE Body (Liquid Chamber) MS, CS (EN -8), ASTM A-105, SS304, SS316 or PPCover Plate MS, CS ( EN-8), ASTM A-105, SS304, SS316 or PP Bolts! Nuts MS or Graded Alloy Steel for high temperature service CC Distance 300, 320, 400, 450, 500 MM Gauge Connection Straight Through / Hook -UpProcess Connection (PC) Flanged to BS, ASA, ANSI, DIN J Screwed to BS or NPT Orientation of PC Top \ Bottom Left, Right .Rear, Vertical isolating valves Integral Offset Needle Valve / Inline Ball / Globe Valve.Vent Plug Drain Needle / Valve Calibrated Scale (Optional) AI / SS linearly calibrated for level values in mm(LC=10mm)Special Features Autoball Check Max. Test Pressure 0-65 Kg/cm??(Kg/cm sq)Max. Temperature ( DegreeC) 0-400 Degree C.
Available in IBR also.
Additional Information:
Product Details:
| Minimum Order Quantity | 01 Piece |
| Type | Reflex Level Gauge |
| Centre Distance | 400 mm |
| Fluid Type | Steam |
| Pressure Type | Medium Pressure |
| Measuring Range | 300mm , 350mm, 400mm, 500mm. |
| Drain Connection | Needle Valve |
| Vent Connection | Needle Valve |
| Model Name/Number | FMIPL-RLG-108 |
| Material | MS , SS.304 , SS.316 |
| Brand | FLOWTECH |
| Usage | Industrial |
| Glass Material | Borosilicate |
| Display Type | Analog |
| Scale Plate | Centimeter (cm) |
| Application | Refinery |
| Gauge Valve | Hand Wheel With Chain |
| Gasket | CAF |
| Mounting Orientation | Side |
| Process Connection | Flanged |
| Scale Marking | Centimeter (cm) |
| Country of Orgin | India |
| Nut and Bolt | MS, SS |
| Flange Standard | ASA 300 # RF |
| Center to Center distance | 300MM, 400mm, 450mm, 500mm |
| Chamber MOC | MS |
| Transmitter Signal | NA |
| Temperature | Up to 400 Degree |
| Storage | Liquid Tanks |
Description
FLOWTECH Instrument offers IBR Water Level Gauge?? for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.??
Description Of Transparent Type Level Gauge-In this type of level gauge the liquid level is discriminated in the form of different.
It is designed for safe and positive visual indication of liquid level in vessels under high pressure & temperature??conditions. It is a flat glass gauge, which has precision moulded prismatic grooves cut on its inner side, which comes??in contact with the medium. Light striking the glass covered by liquid is refracted (absorbed) into the liquid??making this portion appear black, whereas light covering the vapour space is reflected back towards the??viewer, making it appear silvery-white. Thus, a sharp clear line marks the liquid level.
Construction & Operation
Reflex (Fig.1) The liquid chamber (1) is formed by one piece metal body (2), reflex gauge glass (3), sealing gasket (4), cushion {5}and cover plate (6) all held together by u-bolts & nuts (7). The gauge glass sandwitched between the gasket & cushion is placed on front side for viewing of liquid level & held in the recesses machined in the body and cover plate. This ensures leak proof assembly, prevents gasket / cushion slippages and avoids glass to metal contact. The glass section comes in lengths from 11 5mm to 340mm and as many as 5 can be fitted in a single gauge assembly. Extended ranges can be provided by coupling two gauge assemblies through a coupler or the level gauges can be installed in a staggered manner. The level gauge is usually provided with shut - off valves at either ends to isolate the gauge in the event of glass breakage or replacement.
Transparent (Fig. 2) The construction is similar to Reflex except that the liquid chamber (01) is formed by one piece metal body and a pair of transparent gauge glass plates.
Specifications??
Gauge Classification Standard Chamber,Large Chamber or Weld Pad.Gauge Glass Tempered borosilicate (Imported)in 30mm width as standard.Cushion CAF Gasket CAF,PTFE Body (Liquid Chamber) MS, CS (EN -8), ASTM A-105, SS304, SS316 or PPCover Plate MS, CS ( EN-8), ASTM A-105, SS304, SS316 or PP Bolts! Nuts MS or Graded Alloy Steel for high temperature service CC Distance 300, 320, 400, 450, 500 MM Gauge Connection Straight Through / Hook -Up Process Connection (PC) Flanged to BS, ASA, ANSI, DIN J Screwed to BS or NPT Orientation of PC Top \ Bottom Left, Right .Rear, Vertical isolating valves Integral Offset Needle Valve / Inline Ball / Globe Valve.Vent Plug Drain Needle / Valve Calibrated Scale (Optional) AI / SS linearly calibrated for level values in mm(LC=10mm)Special Features Autoball Check Max. Test Pressure 0-65 Kg/cm??(Kg/cm sq)Max. Temperature ( DegreeC) 0-400 Degree C.
Available in IBR also.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Reflex Level Gauge |
| Fluid Type | Water |
| Measuring Range | 300 mm - 500 mm |
| Material | Cast Steel |
| Glass Material | Borosilicate |
| Brand | Flowtech |
| Model Name/Number | FMIPL-RLG-108 |
| Application | Chemical Industries |
| Mounting Orientation | Side |
| Process Connection | Flanged |
| Scale Marking | Millimeter (mm) |
| Scale Material | Stainless Steel |
| Pressure Type | High Pressure |
| Operating Pressure | 5 kg/cm2 to 90 kg/cm2 |
| Operating Temperature | 50 to 400 Deg C |
| Gasket | Graphoil |
| Difference in make and break of switch | NA |
| Float guide wire rope | NA |
| Process Pressure | 5 kg/cm2 - 65 kg/cm2 |
| Process Temperature | 100 Deg C to 400 Deg C |
| Meter Size | 3/4 inch to 1.5 inch |
Description
FLOWTECH Instrument offers IBR Water Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems
Description Of Transparent Type Level Gauge-In this type of level gauge the liquid level is discriminated in the form of different.
It is designed for safe and positive visual indication of liquid level in vessels under high pressure & temperature??conditions. It is a flat glass gauge, which has precision moulded prismatic grooves cut on its inner side, which comes in contact with the medium. Light striking the glass covered by liquid is refracted (absorbed) into the liquid??making this portion appear black, whereas light covering the vapour space is reflected back towards the??viewer, making it appear silvery-white. Thus, a sharp clear line marks the liquid level.
Construction & Operation
Reflex (Fig.1) The liquid chamber (1) is formed by one piece metal body (2), reflex gauge glass (3), sealing gasket (4), cushion {5}and cover plate (6) all held together by u-bolts & nuts (7). The gauge glass sandwitched between the gasket & cushion is placed on front side for viewing of liquid level & held in the recesses machined in the body and cover plate. This ensures leak proof assembly, prevents gasket / cushion slippages and avoids glass to metal contact. The glass section comes in lengths from 11 5mm to 340mm and as many as 5 can be fitted in a single gauge assembly. Extended ranges can be provided by coupling two gauge assemblies through a coupler or the level gauges can be installed in a staggered manner. The level gauge is usually provided with shut - off valves at either ends to isolate the gauge in the event of glass breakage or replacement.
Transparent (Fig. 2) The construction is similar to Reflex except that the liquid chamber (01) is formed by one piece metal body and a pair of transparent gauge glass plates.
Specifications
Gauge Classification Standard Chamber,Large Chamber or Weld Pad.Gauge Glass Tempered borosilicate (Imported)in 30mm width as standard.Cushion CAF Gasket CAF,PTFE Body (Liquid Chamber) MS, CS (EN -8), ASTM A-105, SS304, SS316 or PPCover Plate MS, CS ( EN-8), ASTM A-105, SS304, SS316 or PP Bolts! Nuts MS or Graded Alloy Steel for high temperature service CC Distance 300, 320, 400, 450, 500 MM Gauge Connection Straight Through / Hook -Up Process Connection (PC) Flanged to BS, ASA, ANSI, DIN J Screwed to BS or NPT Orientation of PC Top \ Bottom Left, Right .Rear, Vertical isolating valves Integral Offset Needle Valve / Inline Ball / Globe Valve.Vent Plug Drain Needle / Valve Calibrated Scale (Optional) AI / SS linearly calibrated for level values in mm(LC=10mm)Special Features Autoball Check Max. Test Pressure 0-65 Kg/cm??(Kg/cm sq)Max. Temperature ( DegreeC) 0-400 Degree C.
Available in IBR also.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Type | Reflex Level Gauge |
| Fluid Type | Steam |
| Measuring Range | 0 - 300mm, 400mm, 500mm |
| Material | Cast Steel |
| Application Media | Water, Any Liquid |
| Automation Grade | Automatic |
| Condition | New |
| Meter Type | Electronics |
| Model | FMIPL-RLG-109 |
| Brand | Flowtech |
| Process Pressure | Max. 52 kg/cm2 |
| Power Supply | No |
Additional Information: