Flowtech Measuring Instruments Private Limited

Material	SS, MS
Model Name/Number	FMIPL-RLG-108
Brand	Flowtech
Temperature Range	Up to 400 Deg C
Applications	Liquid
Packaging Type	Box

Minimum order quantity: 1 Piece

REFLEX LEVEL GAUGE

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Model Name/Number	FMIPL-RLG-108
Material	SS, MS
Measuring Range	0 - 4000mm
Size	15 TO 100 NB
Bolts Nuts	MS, SS.304, SS.316
Glass	"Klinger" Make Imported Reflex Glass
Brand	Flowtech
Country of Origin	Made in India
Length	Max. 4000 mm

Minimum order quantity: 1 Piece

TRANSPARENT LEVEL GAUGE:

DESCRIPTION

Flowtech make Transparent Level Gauges employ two transparent glasses fitted with a liquid chamber on either side. The liquid level is indicated as a result of difference in the transparent properties of the two media. For water / steam applications, an illuminator is mounted on the rear side of the gauge with its light rays deflected upward into the water column. This enables the observer to see illuminated surface of the water as the light rays impinged on the surface of separation between water and steam are reflected back to the eye of the observer.

WORKING PRINCIPLE

A part from glass tube level gauges, transparent level gauges are always fitted with two plate transparent glasses between which the fluid is contained. The fluid level is indicated as the result of the different transparency of the two media and in some cases (for water steam), by conveying upwards on to the surface of separation (between liquid and gaseous substances) a source of light located at the back of the gauge, the rays of which are totally reflected down to the observer.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 4000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Model Name/Number	FMIPL-RLG-108
Usage/Application	LIQUID
Material	MS, SS.04, SS.316
Brand	Flowtech
Model	FMIPL-RLG-108
Application	Industrial
Country of Origin	Made in India
Length	Max. 4000 mm

Minimum order quantity: 1 Piece

REFLEX LEVEL INDICATOR

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass.

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 4000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Material	MS , SS.304 , SS.316
Model Name/Number	FMIPL-RLG-108
Measuring Range	0 - 4000mm
Size	15 NB TO 100NB
Model	RTLG-0159
Brand	Flowtech
Temperature Range	Up to 400 Deg C

Minimum order quantity: 1 Piece

TRANSPARENT LEVEL GAUGE:

DESCRIPTION

Flowtech make Transparent Level Gauges employ two transparent glasses fitted with a liquid chamber on either side. The liquid level is indicated as a result of difference in the transparent properties of the two media. For water / steam applications, an illuminator is mounted on the rear side of the gauge with its light rays deflected upward into the water column. This enables the observer to see illuminated surface of the water as the light rays impinged on the surface of separation between water and steam are reflected back to the eye of the observer.

 

 

WORKING PRINCIPLE

A part from glass tube level gauges, transparent level gauges are always fitted with two plate transparent glasses between which the fluid is contained. The fluid level is indicated as the result of the different transparency of the two media and in some cases (for water steam), by conveying upwards on to the surface of separation (between liquid and gaseous substances) a source of light located at the back of the gauge, the rays of which are totally reflected down to the observer.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour

Specifications:

• Type: Reflex / Transparent
• Visibility: Full Visibility / Partial Visibility
• Liquid Chamber: Carbon Steel, S.S.304, S.S.304 (L), S.S.316, S.S.316 (L), P.PLiquid Chamber : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
• Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
• Gasket : CAF , PTFE , Graphoil , Other On request
• Glass : Borosilicate Toughened of Indigenous –  , Klinger / Maxos Make

Model Name/Number	FMIPL-RLG-108
Usage/Application	Liquid
Brand	Flowtech
Application	Industrial
Temperature Range	Up to 400 Deg C
Measuring Range	0 - 4000 mm
Material	SS,MS

Minimum order quantity: 1 Piece

FLOWTECH Instrument offers Reflex Glass Liquid Level Indicator for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.

Description Of Transparent Type Level Gauge :-In this type of level gauge the liquid level is discriminated in the form of different

Specifications:

• Cover Plate: Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.PGlass : Borosilicate Toughened of Indigenous Temperature Range upto 125oC , Klinger / Maxos MakeTemperature Range Upto 400oC , Other on requestDesigned for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries.In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids. In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for coloured. 3000 mm length in single piece.Imported/indigenous glasses on request.Frost free arrangement on request.Available in IBR also.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

Pressure Type	High Pressure
Material	MS,SS.304,SS.316
Model Name/Number	FMIPL-RLG-108
Measuring Range	0 to 4000mm
Glass Material	Borosilicate
Application	for liquid level indication in vessels under high pressure & temperature conditions
Gasket	CAF, PTFE, Graph oil
Process Connection	From 15mm to 80mm Flanged/ Up to 25mm Screwed/ Socket Weld
Operating Temperature	Up to 300 Deg C
Size	Flange Size 1" to 4"
Brand	Flowtech

Minimum order quantity: 1 Piece

REFLEX LEVEL GAUGE

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass.

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Model Name/Number	FMIPL-RTLG-108
Measuring Range	0 - 4000mm
Material	SS, MS
Usage/Application	Industrial
Brand	Flowtech
Material Grade	SS316
Packaging Type	Box

Minimum order quantity: 1 Piece

REFLEX LEVEL GAUGE

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass.

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Model Name/Number	FMIPL-RLG-108
Material	SS.304 , SS.316 , MS
Usage/Application	Industrial
Measuring Range	0 - 4000 mm
Size	15 NB 100 NB
Brand	Flowtech
Country of Origin	Made in India

Minimum order quantity: 1 Piece

REFLEX LEVEL GAUGE

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market.

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90°. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour.

Type	Transparent Level Gauge
Fluid Type	Liquid
Measuring Range	0 - 4000mm
Material	Stainless Steel
Glass Material	Borosilicate
Brand	Flowtech
Model Name/Number	FMIPL-RTLG-108
Application	Industrial Use
Mounting Orientation	Side
Process Connection	Flanged
Scale Material	Stainless Steel
Operating Temperature	Up to 400 Deg C
Gasket	CAF

Minimum order quantity: 1 Piece

TRANSPARENT LEVEL GAUGE:

 

DESCRIPTION

Flowtech make Transparent Level Gauges employ two transparent glasses fitted with a liquid chamber on either side. The liquid level is indicated as a result of difference in the transparent properties of the two media. For water / steam applications, an illuminator is mounted on the rear side of the gauge with its light rays deflected upward into the water column. This enables the observer to see illuminated surface of the water as the light rays impinged on the surface of separation between water and steam are reflected back to the eye of the observer.

 

 

WORKING PRINCIPLE

A part from glass tube level gauges, transparent level gauges are always fitted with two plate transparent glasses between which the fluid is contained. The fluid level is indicated as the result of the different transparency of the two media and in some cases (for water steam), by conveying upwards on to the surface of separation (between liquid and gaseous substances) a source of light located at the back of the gauge, the rays of which are totally reflected down to the observer.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour.

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Model: RTLG-0128

Fluid Type	Liquid
Measuring Range	0 - 4000 mm
Material	Stainless Steel
Glass Material	Borosilicate
Brand	Flowtech
Model Name/Number	FMIPL-RTLG-108
Application	Industrial use
Mounting Orientation	Side
Process Connection	Flanged
Scale Material	Aluminum
Pressure Type	Medium Pressure
Operating Temperature	Up to 400 Deg C
Gasket	CAF
Size	15 NB TO 100 NB

Minimum order quantity: 1 Piece

REFLEX LEVEL GAUGE

DESCRIPTION

Flowtech make Reflex Level Gauge is designed for liquid level indication in vessels under high pressure & temperature conditions. These Reflex Level Gauges are widely demanded in various pharmaceuticals and other industries due to their high performance and longer service ability in the domestic as well as international market. 

WORKING PRINCIPLE

Reflex glass level gauges working principle is based on the light refraction and reflection laws. Reflex glass level gauges use glasses having the face fitted towards the chamber shaped to have prismatic grooves with section angle of 90. When in operation, the chamber is filled with liquid in the lower zone and gases or vapors in the upper zone; the liquid level is distinguished by different brightness of the glass in the liquid and in the gas/vapor zone. The reflex level gauges do not need a specific illumination: the day environmental light is enough. Only during the night an artificial light must be provided.

APPLICATION

Reflex glass level gauges can be used in most of the cases and offer great advantages in terms of: low initial cost, low operating cost, easy level reading. Reflex level gauges cannot be used in certain cases as for example:

• when the separation level between two liquids has to be read (interface)
• when besides the level indication, the observation of the liquid colour is required
• when the process fluid is high-pressure water steam, since in this case the glass must be protected from the solvent action of the boiler water by using mica shields
• when the process fluid is such that can corrode the glass (e.g. high temperature alkaline solutions or hydrofluoric acid), since ica shields or Polytrifluorochloroethylene shields must be used to protect the glass.

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Product Specification

Type	Reflex Level Gauge
Fluid Type	Water
Pressure Type	Medium Pressure
Drain Connection	Needle Valve
Vent Connection	Needle Valve
Material	SS , MS
Usage/Application	Liquid
Model Name/Number	FMIPL-RLG-108
Brand	Flowtech
Application	Industrial
Temperature Range	Up to 400 Deg C
Packaging Type	Box

Minimum order quantity: 1 Piece

DESCRIPTION

Flowtech make Transparent Level Gauges employ two transparent glasses fitted with a liquid chamber on either side. The liquid level is indicated as a result of difference in the transparent properties of the two media. For water / steam applications, an illuminator is mounted on the rear side of the gauge with its light rays deflected upward into the water column. This enables the observer to see illuminated surface of the water as the light rays impinged on the surface of separation between water and steam are reflected back to the eye of the observer.

WORKING PRINCIPLE

 

A part from glass tube level gauges, transparent level gauges are always fitted with two plate transparent glasses between which the fluid is contained. The fluid level is indicated as the result of the different transparency of the two media and in some cases (for water steam), by conveying upwards on to the surface of separation (between liquid and gaseous substances) a source of light located at the back of the gauge, the rays of which are totally reflected down to the observer.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

 

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour

FETURES:

• In reflex level gauges, the glass has precision groves cut inner side and mainly used for colourless liquids.

·         In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colours liquids.

·         Max. 3000 mm length in single piece.

·         Imported/indigenous glasses on request.

·         Frost free arrangement on request.

Type	Reflex Level Gauge
Fluid Type	Water
Measuring Range	300mm , 350mm, 400mm, 500mm....
Model Name/Number	FMIPL-RLG-108
Material	MS , SS.304 , SS.316
Brand	Flowtech
Temperature Range	Up to 125 Deg C
Length	4000 mm
Usage	Industrial
Packaging Type	Box

Minimum order quantity: 1 Piece

Flowtech Instrument offers Chemical Industries Reflex Transparent Level Gauge for the Measurement of liquid level at a glance in tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the area appears dark (Black). While the light strikes the open space, above the liquid level is reflected back to the observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.

Description Of Transparent Type Level Gauge:-In this type of level gauge the liquid level is discriminated in the form of different

Specifications:

• Type: Reflex / TransparentVisibility : Full Visibility / Partial VisibilityLiquid
• Chamber : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
• Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P
• Gasket : CAF , PTFE , Graphoil , Other On request Designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries.In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids. In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids.Max. 3000 mm length in single piece.Imported/indigenous glasses on request.Frost free arrangement on request.

DESCRIPTION

Flowtech make Transparent Level Gauges employ two transparent glasses fitted with a liquid chamber on either side. The liquid level is indicated as a result of difference in the transparent properties of the two media. For water / steam applications, an illuminator is mounted on the rear side of the gauge with its light rays deflected upward into the water column. This enables the observer to see illuminated surface of the water as the light rays impinged on the surface of separation between water and steam are reflected back to the eye of the observer.

WORKING PRINCIPLE

A part from glass tube level gauges, transparent level gauges are always fitted with two plate transparent glasses between which the fluid is contained. The fluid level is indicated as the result of the different transparency of the two media and in some cases (for water steam), by conveying upwards on to the surface of separation (between liquid and gaseous substances) a source of light located at the back of the gauge, the rays of which are totally reflected down to the observer.

APPLICATION

Transparent level gauges are suitable for almost all installations.
In fact they permit:

• the use of mica shields or Polytrifluorochloroethylene shields to protect the glass from the corrosive action of the process fluid
• the observation of interface
• the observation of the liquid colour

Type	Transparent Level Gauge
Fluid Type	Water
Measuring Range	Max. 2000 mm
Material	SS , MS
Model Name/Number	FMIPL-RLG-108
Brand	Flowtech
Material Grade	SS316
Temperature Range	Up to 400 Deg C
Usage	Industrial

Minimum order quantity: 1 Piece

Flowtech Instrument offers High Temperature Reflex Transparent Level Gauge for the Measurement of liquid level at a glancein tank. This is particularly using for High pressure OR High Temperature OR Toxic Liquid Storage Tanks. These gauges have a prism glass window that uses the basic optical principles of light refraction & reflection to enhance the indication of the liquid level. In brief when the light strikes the area of glass covered by the liquid is allow passing to the Interior of the gauge. So that the are aappears dark (Black). While the light strikes the open space, above the liquid level is reflected back tothe observer so that the area appears silver-white. We can clearly see the actual liquid level in the systems.

Description Of Transparent Type Level Gauge: - In this type of level gauge the liquid level is discriminated in the form of different

Specifications:

• Cover Plate: Carbon Steel, S.S.304, S.S.304 (L), S.S.316 ,S.S.316 (L), P.P
• Gasket : CAF , PTFE , Graphoil , Other On request Glass : Borosilicate Toughened of Indigenous – Temperature Range upto 125oC ,Klinger / Maxos Make Temperature Range Upto 400oC , Other on request
• Fasteners: Alloy Steel , S.S.304 , S.S.316, Other on request
• Valve: Screwed OR Auto Shut of ball check Isolation valve Process
• Connation: From 15mm to 65mm Flanged/ Upto 25mm Screwed/ Socket Weld,Other on Request
• Connection Orientation: Top – Bottom Vertical, Side – Side Right , Side – Side Left , Side – SideBack , Other on Request Vent / Drain : ½” Plug , ½” needle Valve, ½” Ball Valve. Other on Request.Accessories : Frost- Free attachment for avoiding ice formation on glasses & clear Visibility.