Flowtech Measuring Instrument Private Limited

Tubular Level Indicator Description Flowtech Make Heavy Duty Tubular Liquid Water Tank Level Indicator is a Simple & reliable device for direct reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & also endanger human life.

The top & bottom liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate) is fully Protected by Box Section made out of 2 mm thick M.S. channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact.

• We are using 100% PTFE (TEFLON) rope as packing to ensure positive leak tightness for full vacuum as well as 6 Kg / Cm service pressure
• As Compare to Reflex & Transparent type Level Gauge, this Tubular Level Indicator is light in weight
• It is available in single length of 3000 mm C/C Distance. We can extend the length by coupling 2 or more through coupler
• We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request
• It is simple and reliable device for direct reading in atmospheric or pressurized (below 5 Kg/cm2) tank application
• It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Start leaking
• Glass Tube (Borosilicate Boiler Quality) is fully protected by guard Rods or Box Section made of 'C' – Channel
• Offset Constructed Isolation Valve on request.The connection provided will be Flanged / Screwed / TC Joint.

Material Of Construction:

• Aluminum / Acrylic / SSLiquid Chamber (End Fitting) :P.P / C.S. / S.S.304 / S.S.316 / MS with PP or Teflon Lined.
• Protection Guard :MS, SS-304, SS-316, PPTubular Level IndicatorSimple and reliable device for direct reading in atmospheric or below 5kg/cm’ pressurized tank.Bolted gland with Teflon packing ensures positive leak tightness for full vacuum as well as 10 kg/cm pressure.Available in Aluminum Acrylic, SS linearly calibrated scale.

Flowtech Make Heavy Duty Tubular Liquid Level Indicator is a Simple & reliable device for direct Reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & Also endanger human life.

Working Principle:

• The Gauge is fitted between two end blocks through gland packings The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in gauge. Guards are provided in the form of tie-rods / c - channels around the gauge to protect it from accidental blows. End blocks have built-in-isolating valve, drain valve and vent plug.

Specification:

• Connection: Flanged ASA 150# / Screwed/ T.C joint
• End Fitting: CS/S.S.304/S.S 316/P.P/FRP, PTFE Lined
• Protective Channel: C.S. Rectangle Channel box With Powder Coated/ S.S.304 / S.S 316 /P.P / FRP.
• Glass Tube: Heavy Walled Borosilicate H-19 / 16 / 25
• Packing: Teflon
• Valve: C.S./S.S.304/S.S.316/P.P.

Product Description :

Tubular Level Gauge is the simplest form of level indication. Flowtech Measuring Instruments offer economical and reliable level gauges for direct reading of liquid level in tanks / vessels. Tubular Level Gauges are used to visualize the level in low or medium pressure application.

Tubular Level Gauges are mounted on the side of the tank / vessel. It consists of Glass Tube, Packing Material, End Blocks and Isolation Valves, vent plug, drain valve etc.

Working Principle :

The Gauge is fitted between two end blocks through gland packings. The gauge is mounted parallelto tank so as to form a close loop causing tank liquid to seek its level in gauge. Guards areprovided inthe form oftie-rods / c - channels around the gauge to protectit from accidental blows. End blocks have built-in-isolating valve,drainvalve andventplug.

Design Feature : 

1. The top & bottom Liquid Chamber of indicator is made of solid bar & Glass Tube (Borosilicate)is fullyprotectedbyBoxSectionmadeoutof2mmthickM.S. channel. thebox is sogood that evenif amanstandsonthe indicator, supportedat both ends, the tube remains intact.

2. We are using 100% PTFE (TEFLON) rope in packing to ensure positive leak tightness for full vacuumaswell as 6Kg /Cm² service pressure.

3. As compared to reflex & transparent type level gauge, this Tubular Level Indicator is light in weight

4. Itisavailable insingle lengthof3000mmC/CDistance.Wecanextendthe lengthby coupling 2 or more through coupler

5. We are providingAir Vent Plug attop&drain plug at bottom for taking sample. We can also provide InbuiltIsolation Valve on request

6. Itis simpleandreliabledevicefordirect readinginatmosphericorpressurized(below5 Kg/cm²) tankapplication

7. It Eliminates trouble giving threaded joints of Conventional Gauge Glass Cock as hazardous Chemicals Startleaking

8.GlassTube(BorosilicateBoilerQuality)isfullyprotectedbyguardRodsorBoxSection made of'C' – Channel

9. Offset Constructed Isolation Valve on request

10. The connectionprovidedwill beFlanged /Screwed/TC Joint 

Specification :

Connection : Flanged ASA 150# / Screwed / T.C Joint

End Fitting : CS / S.S.304 / S.S. 316 / P.P. / MS with FEP or PFA Lined

Protective Channel : C.S. Rectangle Channel box With Powder Coated/ SS304/SS316 / PP

Glass Tube : Heavy Walled Borosilicate H-19/16 / 25

 Packing : PTFE

Isolation Valve : C.S. / S.S. 304 / S.S. 316 / P.P.

Press Rating : Up to 5 Kg/cm²

Temp. Rating : Up to 120º C

Range : 300 to 3000 mm (more than 3000 mm please consult factory)

Air Vent : Stop Plug / Valve

Drain : Stop Plug / Valve / Blind Flange

Flowtech Make Heavy Duty Tubular Liquid Level Indicator is a Simple & reliable device for direct Reading in atmospheric or pressurized tank application. These indicators eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous damage surrounding equipments & Also endanger human life.

Working Principle:

• The Gauge is fitted between two end blocks through gland packings The gauge is mounted parallel to tank so as to form a close loop causing tank liquid to seek its level in gauge. Guards are provided in the form of tie-rods / c - channels around the gauge to protect it from accidental blows. End blocks have built-in-isolating valve, drain valve and vent plug.