Flowtech Measuring Instrument Private Limited

Technical Data Sheet

Material of construction :

Enclosure: Aluminum anodize/S.S-304/S.S-316
Rotor: Aluminum anodize/S.S-316/PPS
O-ring: NBR/Viton
Shaft: Hard Stainless Steel-316 Accuracy (standard installation position) : ±1% RS /0.15% FSD Repeatability : 0.1%.
Maximum working pressure: 5 MPa for aluminum body, 25 MPa for S.S body, above 250 bars please Contact Company.
Fluid & Ambient temperature: -40 to 80°C
Power voltage: Battery operated
Connection: Thread (M/F) or Flange.
Connection Size : 1/4" to 3" 
Flow Range : 50 LPH TO 50000 LPH


Application :

Aluminum body and rotor: Flow measurements of kerosene, Gasoline, diesel, light oil, heavy oils’. Body and rotor: Flow measurements of Pharmaceutical drug, food oil, and all application.

Calibration process :

*Calibrated each flow sensor with three pressure point : 0.5,4 and 25 bar,
*All pressure calculate pulse/litter at : 25%, 50%, 75% and 100% flow rate
*Calibrated with pure diesel.

1) Pulse Output Sensor :
Power voltage: 12 V DC
Output signal: NPN open connector
Output: High electric level: High than 8 VDC (input voltage 12 VDC) Low electric level: lower than 0.8 VDC (input voltage 12 VDC)  

3) Display with 4 to 20 mA
Output Power voltage: 24 V DC Output signal: 4 TO 20 mA 

Technical Data Sheet

Material of construction :

Enclosure: Aluminum anodize/S.S-304/S.S-316
Rotor: Aluminum anodize/S.S-316/PPS
O-ring: NBR/Viton
Shaft: Hard Stainless Steel-316 Accuracy (standard installation position) : ±1% RS /0.15% FSD Repeatability : 0.1%.
Maximum working pressure: 5 MPa for aluminum body, 25 MPa for S.S body, above 250 bars please Contact Company.
Fluid & Ambient temperature: -40 to 80°C
Power voltage: Battery operated
Connection: Thread (M/F) or Flange.
Connection Size : 1/4" to 3" 
Flow Range : 50 LPH TO 50000 LPH


Application :

Aluminum body and rotor: Flow measurements of kerosene, Gasoline, diesel, light oil, heavy oils’. Body and rotor: Flow measurements of Pharmaceutical drug, food oil, and all application.

Calibration process :

*Calibrated each flow sensor with three pressure point : 0.5,4 and 25 bar,
*All pressure calculate pulse/litter at : 25%, 50%, 75% and 100% flow rate
*Calibrated with pure diesel.

1) Pulse Output Sensor :
Power voltage: 12 V DC
Output signal: NPN open connector
Output: High electric level: High than 8 VDC (input voltage 12 VDC) Low electric level: lower than 0.8 VDC (input voltage 12 VDC)  

3) Display with 4 to 20 mA
Output Power voltage: 24 V DC Output signal: 4 TO 20 mA 

Technical Data Sheet

Material of construction :

Enclosure: Aluminum anodize/S.S-304/S.S-316
Rotor: Aluminum anodize/S.S-316/PPS
O-ring: NBR/Viton
Shaft: Hard Stainless Steel-316 Accuracy (standard installation position) : ±1% RS /0.15% FSD Repeatability : 0.1%.
Maximum working pressure: 5 MPa for aluminum body, 25 MPa for S.S body, above 250 bars please Contact Company.
Fluid & Ambient temperature: -40 to 80°C
Power voltage: Battery operated
Connection: Thread (M/F) or Flange.
Connection Size : 1/4" to 3" 
Flow Range : 50 LPH TO 50000 LPH


Application :

Aluminum body and rotor: Flow measurements of kerosene, Gasoline, diesel, light oil, heavy oils’. Body and rotor: Flow measurements of Pharmaceutical drug, food oil, and all application.

Calibration process :

*Calibrated each flow sensor with three pressure point : 0.5,4 and 25 bar,
*All pressure calculate pulse/litter at : 25%, 50%, 75% and 100% flow rate
*Calibrated with pure diesel.

1) Pulse Output Sensor :
Power voltage: 12 V DC
Output signal: NPN open connector
Output: High electric level: High than 8 VDC (input voltage 12 VDC) Low electric level: lower than 0.8 VDC (input voltage 12 VDC)  

3) Display with 4 to 20 mA
Output Power voltage: 24 V DC Output signal: 4 TO 20 mA 

Technical Data Sheet

Material of construction :

Enclosure: Aluminum anodize/S.S-304/S.S-316
Rotor: Aluminum anodize/S.S-316/PPS
O-ring: NBR/Viton
Shaft: Hard Stainless Steel-316 Accuracy (standard installation position) : ±1% RS /0.15% FSD Repeatability : 0.1%.
Maximum working pressure: 5 MPa for aluminum body, 25 MPa for S.S body, above 250 bars please Contact Company.
Fluid & Ambient temperature: -40 to 80°C
Power voltage: Battery operated
Connection: Thread (M/F) or Flange.
Connection Size : 1/4" to 3" 
Flow Range : 50 LPH TO 50000 LPH


Application :

Aluminum body and rotor: Flow measurements of kerosene, Gasoline, diesel, light oil, heavy oils’. Body and rotor: Flow measurements of Pharmaceutical drug, food oil, and all application.

Calibration process :

*Calibrated each flow sensor with three pressure point : 0.5,4 and 25 bar,
*All pressure calculate pulse/litter at : 25%, 50%, 75% and 100% flow rate
*Calibrated with pure diesel.

1) Pulse Output Sensor :
Power voltage: 12 V DC
Output signal: NPN open connector
Output: High electric level: High than 8 VDC (input voltage 12 VDC) Low electric level: lower than 0.8 VDC (input voltage 12 VDC)  

3) Display with 4 to 20 mA
Output Power voltage: 24 V DC Output signal: 4 TO 20 mA 

Mechanical Oval Gear Flow Meter. Flowtech Measuring Instruments Pvt Ltd, producer of oval gear flow meter with

•  Mechanical
• Digital display battery operated,
• Flow sensor with pulse output/4 to 20 mA output

Flowtech is producer of CE certified mechanical oval gear fuel flow meter for measuring flow of fuel, kerosene, Gasoline, diesel, light oil, heavy oil, petrol ,LDO, HDO, wine, bear, alcohol, milk, juice, coffee, tea, all chemical and pharmaceutical drug.

Application:

• Diesel Flow meter is a kind of positive displacement Meter to measure the liquid flow or instantaneous flow of the Pipe tube. lt is a kind of accumulate meter. With Characteristics of high accuracy, small change by the fluid Viscosity, it is widely used to measure oil kind liquid, forbidden to measure corrosive.

Working Principle:

• The measurement part of oval gear flow meter is posed by two elliptical gears mesh with each other and its shell (measuring room).The figure shows that the flow meter works by two elliptical gears to mesh with each other, its working process are as follows: P1 in the figure shows the pressure of liquid from inlet side, to show the outlet pressure, the bottom rotor has no rotating torque even it effected the liquid pressure, but the above gears will move by the rotating

Pressure:

• ln the status of the above gears driving gear, and the bottom gear is driven gear. both of these two gears have rotating torque by the liquid pressu/'e, and they move with the direction of the arrow to space The gear space is opposite to, the bottom gear is driving gear, and above gear is driven gear. The bottom gear pushes the liquid out from the half moon space under the liquid press pushes liquid volume four times of

Technical Data Sheet

Material of construction :

Enclosure: Aluminum anodize/S.S-304/S.S-316
Rotor: Aluminum anodize/S.S-316/PPS
O-ring: NBR/Viton
Shaft: Hard Stainless Steel-316 Accuracy (standard installation position) : ±1% RS /0.15% FSD Repeatability : 0.1%.
Maximum working pressure: 5 MPa for aluminum body, 25 MPa for S.S body, above 250 bars please Contact Company.
Fluid & Ambient temperature: -40 to 80°C
Power voltage: Battery operated
Connection: Thread (M/F) or Flange.
Connection Size : 1/4" to 3" 
Flow Range : 50 LPH TO 50000 LPH


Application :

Aluminum body and rotor: Flow measurements of kerosene, Gasoline, diesel, light oil, heavy oils’. Body and rotor: Flow measurements of Pharmaceutical drug, food oil, and all application.

Calibration process :

*Calibrated each flow sensor with three pressure point : 0.5,4 and 25 bar,
*All pressure calculate pulse/litter at : 25%, 50%, 75% and 100% flow rate
*Calibrated with pure diesel.

1) Pulse Output Sensor :
Power voltage: 12 V DC
Output signal: NPN open connector
Output: High electric level: High than 8 VDC (input voltage 12 VDC) Low electric level: lower than 0.8 VDC (input voltage 12 VDC)  

3) Display with 4 to 20 mA
Output Power voltage: 24 V DC Output signal: 4 TO 20 mA