Flowtech Measuring Instruments Private Limited

Model Name/Number	FMIPL-EMFM-F-C-PL-EL2-AC1-M-CR-P-I-050
Application Media	Water
Brand	FLOWTECH
Usage/Application	Water
Connection	50 NB
Display	Digital
Flow Range	3 - 36 m3/hr
Accuracy	+- 0.5% on Current Reading.
Flange Size	50 NB ASA 150 # RF

Minimum order quantity: 1 Piece

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.

The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/BSP
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA / RS485 / PULSE / HART
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.

Minimum order quantity: 1 Certificate

Flowtech is an all-equipped calibration & testing laboratory in the led of Flow & Level parameters with wide range of scope & accuracy by maintaining our level of CMC. We can provide calibration, loop checking installation on-premise at your factory.

NABL Accredited Flow Calibration Services

As a manufacturer of ow measuring equipment for various industrial end users, we are dedicated in helping you achieve the highest levels of accuracy of your ow meters. Flowtech's NABL-accredited calibration laboratory can provide ow meter calibration services for our own manufactured ow meters as well as other ow manufacturers. Periodic recalibrations are often needed to ensure traceable accuracy and repeatability. Our laboratories have a wellestablished quality system complying with the international standard ISO/IEC 17025 requirement.

Our Calibration Reports are recognized worldwide by industry, similar laboratories and other organizations. Flowtech Calibration laboratory is recognized by industry and MNCs, PSUs, R&D and SMEs organizations.

Our services are of majorly two types:
1. Calibration at In-house Laboratory
2. On-site Calibration 
 
On-Site Portable Laboratory:

PARAMETER DESCRIPTION:

Range of Flow Meter : 35 to 700 Meter³ / Hour
Pipe Material : All Metals, most plastics & berglass
Liquid Types : Most liquids including clean water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer & more..
Media Temperature Range : ( -10º to 160º C ) Celsius
Mass or Volumetric Rate Units : Meter³ / Hour, Liter / Minute, Cubic Feet, USA Gallon etc..
Maximum Fluid Velocity of Liquid : ± 32 m/s
Traceability : ISO17025:2017 Certied Laboratory

Minimum order quantity: 1 Piece

Product Description:

The Electromagnetic Flowmeter or Mag Meters are suitable for flow measurement in all kinds of conductive fluids, and it is especially suited for flow measurement of Water, Waste Water, Sludge and other fluids containing particles. The flow meter is easy to install and put to service. 

Measurement : 
Electromagnetic flow meters may have either Direct Current (DC) or Alternating Current (AC) excitation. When systems are AC excited, electrostatic and/or electromagnetic noise may influence the measurements. A DC excited system however, is less sensitive to noise produced by electromagnetic induction, simply because the voltage induced over the electrodes will be a DC voltage. The drawbacks are measurement errors due to electro-chemical polarization between the electrodes and the fluid.

The Electromagnetic Flow Meters are excited by a 2.5 Hz square wave and thereby eliminate the drawbacks of both DC and AC systems. A microprocessor receives and measures the amplitude of the pulse with a 16 - bit resolution, and converts and displays the result on the display unit.

Working Principle:

• This is working on the principal of faraday`s law which states that when a conductor moves through a magnetic field of a given strength a voltage is produced in the conductor and proportion to the relative velocity between the conductor and the magnetic field.

Applications:

• Scientific laboratory
• Research centres
• Chemical industries

Specifications:

• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Nominal Dia (mm): 15 to 1000mm
• Material of Construction: MS, SS 304, SS 316 & SS 316L
• Electrode Material: SS 316, SS 316L, Hastelloy ‘c’, & Tantalum
• Process Pressure: Max. 25 kg/cm2
• Process Temperature: Max. 150C
• Flow Tube Material: SS 316
• End Connection: Flange/Wafer/BSP
• Flange- Standard: ANSI B 16.5 150 #RF / 300 # RF
• Measuring Range: 0.5 m/sec for Minimum & 5m/sec for Maximum
• Accuracy: ± 1%
• FSD Optional: ±0.5% FSD
• Repeatability: 0.3%
• Display: 2 Line Alfa Numeric LCD
• Display Version: Integral /Remote
• Display Unit: Standard Unit in M3, Litre
• Power Supply: 230 VAC, 110 VAC & 24 VDC
• Output: Std. 4 – 20 mA / RS485 / PULSE / HART
• Protection Class for Sensor: IP 65
• Protection Class for Transmitter: IP 65
• Cable Length for Remote: 30meters
• metersInstallation: Inline Flange Type.