Flowtech Measuring Instruments Private Limited

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications.

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table : 

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications.

Minimum order quantity: 1 Piece

Product Description : 

A turbine flow meter is used for volumetric total flow and/or flow rate measurement and has a relatively simple working principle. As fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. The resulting output is taken by an electrical pickoff(s) mounted on the flow meter body.

Product Features : 

1. Highly sensitive to low flow rates
2. Very accurate over its entire flow range

Technical Datasheet : 

Material of Construction : 

Enclosure : S.S-304/S.S-316Rotor       : S.S-304Shaft       : Hard Stainless Steel-316 with carbon bushAccuracy (standard installation position) : +/- 0.5 OR 1% FSDRepeatability : 0.1%Maximum working Pressure : 6 MPaFluid & Ambient Temperature : -20º C to 120º CConnection : Threaded (M/F) OR Flanged

Pulse Output Sensor :

Power voltage : 12 V DCOutput signal : NPN open connector

Output :High electric level : Higher than 8 V DC (input voltage 12 VDC)Low electric level : Lower than 0.8 V DC (input voltage 12 VDC)

Battery Operated Meter :

Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row.
Display mode : Double row Liquid Crystal Display (LCD), as follows:L XXX. X four instantaneous flow (M³/Hr) orL/h XX. XXXXXX eight cumulative flow (M³)

• Cumulative flow automatically expands the display precision• The cumulative flow values can be reset• Power-fail protection instrument coefficient• The Total flow values are not lost for ten years when power supply drop

Display With 4 To 20 Ma Output:

Power voltage : 24 V DCOutput signal : 4 TO 20 mA

Application :

Turbine flow meters are used to measure clean, dry gases and liquids such as hydrocarbons,chemicals, gases and vapours, fuels and other types of liquids with lower viscosity, and for applications requiring highly accurate and precise measurements. They are applicable in S.S. body and rotor flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all other applications. 

Capacity Table :