Flowtech Measuring Instrument Private Limited

Flowtech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry,etc.
Vortex Theory:One triangular prism vortex generator in the flow meter, regular vortex will be generated at both thesides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the widthof the surface of triangular prism incident flow, then we get the computation formula:

            f=StV/d
St: Strouhal number (Constant)

2. Applications
1. Pure liquids and hydrocarbon with low viscosity (< 10 cP)
2. Water Industry
3. Chemicals that suitable with S.S. 316 Material
4. Saturated steam
5. Superheated steam
6. Industrial gases
7. Compressor air measurement

Gas : air, oxygen, nitrogen, coal gas, natural gas, chemical gas Liquid : water, high temperature water, oil, food liquid, chemical liquid, steam: saturatedsteam, overheated steam

3. Features

1. No moving parts, wear resistance with a simple and fastness structure2. The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy3. Meter body adopts stainless steel material, corrosion-proof4. Pulse signal output, two-wire system 4-20mA current output, RS-485 output


4. Technical Data Sheet

Gas, Air, Vapor and Steam - Vortex meter with pressure and temp. Compensations Liquid - Volume nocompensation, mass available with Compensations.

Material of construction:

Enclosure : S.S.-316/S.S-304/1Cr18Ni9Ti / customer require
Sensor : stainless steel 316 / Tantalum
Repeatability : 0.02%
Accuracy : +/- 0.5 for liquid
                : 1% for gas/steam/air/vapor 
Flow range : Liquid:0.4-7.0m/s;
                 : Gas:4.0-60.0m/s; 
                 : Steam:5.0-70.0m/s  
Maximum working pressure : 60 barFluid &Ambient temperature: -40 to 350 Deg. C Connection: Thread (M)/ Flange.

Display with 4 to 20 mA output.

Power voltage: 24 V DCOutput signal: 4 TO 20 mAOptional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly.

Flowtech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry,etc.
Vortex Theory:One triangular prism vortex generator in the flow meter, regular vortex will be generated at both thesides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the widthof the surface of triangular prism incident flow, then we get the computation formula:

            f=StV/d
St: Strouhal number (Constant)

2. Applications1. Pure liquids and hydrocarbon with low viscosity (< 10 cP)2. Water Industry3. Chemicals that suitable with S.S. 316 Material4. Saturated steam5. Superheated steam6. Industrial gases7. Compressor air measurement

Gas : air, oxygen, nitrogen, coal gas, natural gas, chemical gas Liquid : water, high temperature water, oil, food liquid, chemical liquid, steam: saturatedsteam, overheated steam

3. Features

1. No moving parts, wear resistance with a simple and fastness structure2. The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy3. Meter body adopts stainless steel material, corrosion-proof4. Pulse signal output, two-wire system 4-20mA current output, RS-485 output


4. Technical Data Sheet

Gas, Air, Vapor and Steam - Vortex meter with pressure and temp. Compensations Liquid - Volume nocompensation, mass available with Compensations.

Material of construction:

Enclosure : S.S.-316/S.S-304/1Cr18Ni9Ti / customer require
Sensor : stainless steel 316 / Tantalum
Repeatability : 0.02%
Accuracy : +/- 0.5 for liquid
                : 1% for gas/steam/air/vapor 
Flow range : Liquid:0.4-7.0m/s;
                 : Gas:4.0-60.0m/s; 
                 : Steam:5.0-70.0m/s  
Maximum working pressure : 60 barFluid &Ambient temperature: -40 to 350 Deg. C Connection: Thread (M)/ Flange.

Display with 4 to 20 mA output.

Power voltage: 24 V DCOutput signal: 4 TO 20 mAOptional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly.

Flowtech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry,etc.
Vortex Theory:One triangular prism vortex generator in the flow meter, regular vortex will be generated at both thesides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the widthof the surface of triangular prism incident flow, then we get the computation formula:

            f=StV/d
St: Strouhal number (Constant)

2. Applications1. Pure liquids and hydrocarbon with low viscosity (< 10 cP)2. Water Industry3. Chemicals that suitable with S.S. 316 Material4. Saturated steam5. Superheated steam6. Industrial gases7. Compressor air measurement

Gas : air, oxygen, nitrogen, coal gas, natural gas, chemical gas Liquid : water, high temperature water, oil, food liquid, chemical liquid, steam: saturatedsteam, overheated steam

3. Features

1. No moving parts, wear resistance with a simple and fastness structure2. The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy3. Meter body adopts stainless steel material, corrosion-proof4. Pulse signal output, two-wire system 4-20mA current output, RS-485 output


4. Technical Data Sheet

Gas, Air, Vapor and Steam - Vortex meter with pressure and temp. Compensations Liquid - Volume nocompensation, mass available with Compensations.

Material of construction:

Enclosure : S.S.-316/S.S-304/1Cr18Ni9Ti / customer require
Sensor : stainless steel 316 / Tantalum
Repeatability : 0.02%
Accuracy : +/- 0.5 for liquid
                : 1% for gas/steam/air/vapor 
Flow range : Liquid:0.4-7.0m/s;
                 : Gas:4.0-60.0m/s; 
                 : Steam:5.0-70.0m/s  
Maximum working pressure : 60 barFluid &Ambient temperature: -40 to 350 Deg. C Connection: Thread (M)/ Flange.

Display with 4 to 20 mA output.

Power voltage: 24 V DCOutput signal: 4 TO 20 mAOptional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly.

Flowtech Vortex Flow Meter is based on Karman vortex street Principal for detection and metering the Liquid, Gas and Steam. It is widely used in Petroleum, chemical, metallurgy, heat supply industry,etc.
Vortex Theory:One triangular prism vortex generator in the flow meter, regular vortex will be generated at both thesides of triangular prism, which is called Karman swirl.Suppose the vortex generation frequency is f, the average flow velocity of medium is V, d is the widthof the surface of triangular prism incident flow, then we get the computation formula:

            f=StV/d
St: Strouhal number (Constant)

2. Applications
1. Pure liquids and hydrocarbon with low viscosity (< 10 cP)
2. Water Industry
3. Chemicals that suitable with S.S. 316 Material
4. Saturated steam
5. Superheated steam
6. Industrial gases
7. Compressor air measurement

Gas : air, oxygen, nitrogen, coal gas, natural gas, chemical gas Liquid : water, high temperature water, oil, food liquid, chemical liquid, steam: saturatedsteam, overheated steam

3. Features

1. No moving parts, wear resistance with a simple and fastness structure2. The allowed working temperature is wide from -400Cto +3500C wide range, High accuracy3. Meter body adopts stainless steel material, corrosion-proof4. Pulse signal output, two-wire system 4-20mA current output, RS-485 output


4. Technical Data Sheet

Gas, Air, Vapor and Steam - Vortex meter with pressure and temp. Compensations Liquid - Volume nocompensation, mass available with Compensations.

Material of construction:

Enclosure : S.S.-316/S.S-304/1Cr18Ni9Ti / customer require
Sensor : stainless steel 316 / Tantalum
Repeatability : 0.02%
Accuracy : +/- 0.5 for liquid
                : 1% for gas/steam/air/vapor 
Flow range : Liquid:0.4-7.0m/s;
                 : Gas:4.0-60.0m/s; 
                 : Steam:5.0-70.0m/s  
Maximum working pressure : 60 barFluid &Ambient temperature: -40 to 350 Deg. C Connection: Thread (M)/ Flange.

Display with 4 to 20 mA output.

Power voltage: 24 V DCOutput signal: 4 TO 20 mAOptional output on demand : HART protocol / RS-485/ ALARM/3 wire pulse output / Data recording hourly, daily and monthly.